







Floor Paint Anti Slip - Pallet - 20 x 5L - Grey
SKU: FS-01227








In stock
Product Features:
- Exceptional slip resistance
- Great for warehouses, factories, workshops and heavy foot traffic
- Use it on most surfaces - concrete, wood, stone and cement
- Stands up to oil and grease
Select Size:
Select Colour:
Current Selection: Mid Grey (RAL 7042 - Traffic Grey A)
Alternative sizes available
Looking for a different size? This product is also available in single 5L tins
Shop NowFREE Standard Delivery*
Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)
Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.
*Delivery exclusions
We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.
Collapsible content
-
floorsaver Floor Paint dust proofs, seals and protects internal concrete floors. Two coats provide a glossy, easily cleaned finish. It can be applied to bare concrete or existing well bonded paint. When recoating existing floor paint of a similar colour, one coat is generally all that is needed.
You might also like:
-
Cleaner Degreaser for oily and dusty floors
-
Floor Etcher for new concrete
- A Floor Roller for the best results
-
Concrete Floor Paint Anti Slip for a slip resistant finish
- Universal Concrete Primer for better adhesion
Please note - orders for the Yellow colour of our Floor Paint will be labelled as Hazard Paint.
-
Cleaner Degreaser for oily and dusty floors
-
Preparation
- On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface. On greasy or previously painted floors clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity.
Repairs
Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.
Application
- Check the floor is dry before painting and that the temperature is a minimum of 15°C
- Stir the paint thoroughly.
- Do not thin.
- Tip into a roller tray.
- Cut in around edges with a brush.
- Apply to the floor area using a paint roller, working well into the surface. "Bare Concrete" should be sufficiently porous to allow the first coat to sink in.
- If using floorsaver Floor Paint Anti Slip, tip the small tin of Anti Slip Aggregate into the tin and stir thoroughly using a "Wood"en batten or similar. Use the whole tin of aggregate for the 5L pack size and half for the 2.5L.
- Clean equipment with White Spirit
-
Specification Value Product usage - Interior
Product shelf life 3 years, if unopened and should not be allowed to freeze. Minimum application temperature 15°C Product drying time At 15-20°C: Recoat - 16 hours (if there is a time lapse between coats, the second coast must be applied within 5 days of the first coat). Touch Dry - 10 hours. Light Foot Traffic - 24 hours. Full Use - 36 hours. Please check that the paint has fully cured before putting into full use. Product coats 2 coats usually required, although 1 coat may be enough if painting over an existing floor paint of a similar colour. Product coverage 5L covers up to 40m² per coat. 2.5L covers up to 20m² per coat Product properties Resists spills of oils and grease Product applications Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L. Usable working time (at 15°C) 2 hours. We do not recommend - Using this product in areas where cars are parked - instead use floorsaver Epoxy Floor Paint.
- Using outside.
- Applying to self-levelling floor "Screed"s.
- Applying to concrete contaminated with oil, grease, fats or wax.
- Applying to hard, smooth, very dense or power floated concrete where the paint can't soak into the surface. If in doubt tip a cup of water onto the floor and see if it disappears.
-
Product Information Sheet
DownloadSafety Data Sheet
DownloadSafety Data Sheet - Non Slip Additive
DownloadFloorsaver RAL Colour Chart
Download
Collapsible content
Description
floorsaver Floor Paint dust proofs, seals and protects internal concrete floors. Two coats provide a glossy, easily cleaned finish. It can be applied to bare concrete or existing well bonded paint. When recoating existing floor paint of a similar colour, one coat is generally all that is needed.
You might also like:
-
Cleaner Degreaser for oily and dusty floors
-
Floor Etcher for new concrete
- A Floor Roller for the best results
-
Concrete Floor Paint Anti Slip for a slip resistant finish
- Universal Concrete Primer for better adhesion
Please note - orders for the Yellow colour of our Floor Paint will be labelled as Hazard Paint.
How to Use
Preparation
- On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface. On greasy or previously painted floors clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity.
Repairs
Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.
Application
- Check the floor is dry before painting and that the temperature is a minimum of 15°C
- Stir the paint thoroughly.
- Do not thin.
- Tip into a roller tray.
- Cut in around edges with a brush.
- Apply to the floor area using a paint roller, working well into the surface. "Bare Concrete" should be sufficiently porous to allow the first coat to sink in.
- If using floorsaver Floor Paint Anti Slip, tip the small tin of Anti Slip Aggregate into the tin and stir thoroughly using a "Wood"en batten or similar. Use the whole tin of aggregate for the 5L pack size and half for the 2.5L.
- Clean equipment with White Spirit
Technical Spec
Specification | Value |
---|---|
Product usage |
|
Product shelf life | 3 years, if unopened and should not be allowed to freeze. |
Minimum application temperature | 15°C |
Product drying time | At 15-20°C: Recoat - 16 hours (if there is a time lapse between coats, the second coast must be applied within 5 days of the first coat). Touch Dry - 10 hours. Light Foot Traffic - 24 hours. Full Use - 36 hours. Please check that the paint has fully cured before putting into full use. |
Product coats | 2 coats usually required, although 1 coat may be enough if painting over an existing floor paint of a similar colour. |
Product coverage | 5L covers up to 40m² per coat. 2.5L covers up to 20m² per coat |
Product properties | Resists spills of oils and grease |
Product applications | Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L. Usable working time (at 15°C) 2 hours. |
We do not recommend |
|