Floor Paint - 5L

Floor Paint - 5L

In Stock

The best value concrete Floor Paint money can buy - with the lowest price guaranteed.

Great for improving the look of worn out floors, floorsaver Concrete Floor Paint is easy to use, hard-wearing and will give you a floor that looks great, is easy to clean and will last for years.

The lowest price - guaranteed!

Great for workshops, factories and warehouses

Use it on most surfaces - concrete, wood, stone and cement

Stands up to oil and grease 

Also available:





floorsaver concrete Floor Paint dustproofs, seals and protects internal concrete floors. Two coats provide a glossy, easily cleaned finish. It can be applied to bare concrete or existing well bonded paint. If you're re-coating over an existing paint of a similar colour, one coat should do the job. 

You might also like: 


How to Use

Step 1 - Preparation:

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface. On greasy or previously painted floors clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity.


Step 2 - Repairs:

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Concrete Filler can be used if you want a curved edge, such as a stair nosing, etc.


Step 3 - Application:

  • Check the floor is dry before painting and that the temperature is a minimum of 15 ℃.
  • Stir the paint thoroughly.
  • Do not thin.
  • Tip into a roller tray.
  • Cut in around edges with a brush.
  • Apply to the floor area using a paint roller, working well into the surface. Bare concrete should be sufficiently porous to allow the first coat to sink in.
  • Clean equipment with White Spirit.

      Technical Spec

      Interior/exterior usage For interior use only
      Uses Suitable for bare concrete or existing well bonded paint, wood and most metal
      Properties Resists spills of oils and grease
      Coats 2 coats usually required, although 1 coat may be enough if painting over an existing floor paint of a similar colour
      • 5L covers up to 40m² per coat
      • 2.5L covers up to 20m² per coat
      Drying times

      At 15-20 ℃:

      • Recoat - 16 hours (if there is a time lapse between coats, the second coat must be applied within 5 days of the first coat)
      • Touch Dry - 10 hours
      • Light Foot Traffic - 24 hours
      • Full Use - 36 hours. Please check that the paint has fully cured before putting into full use
      Minimum application temperature 15 ℃
      Applications Tough enough for use in warehouses, workshops and for general industrial use
      Shelf life Shelf Life - 12 months, if unopened. Do not allow to freeze.


      We don't recommend:

      • Using this product in areas where cars are parked - instead use floorsaver Epoxy Floor Paint.
      • Using outside.
      • Applying to self-levelling floor screeds.
      • Applying to concrete contaminated with oil, grease, fats or wax.
      • Applying to hard, smooth, very dense or power floated concrete where the paint can't soak into the surface. If in doubt tip a cup of water onto the floor and see if it disappears.

      Product Information Sheet


      Safety Sheet



      Have a Question?

      Be the first to ask a question about this.

      Ask a Question