Packshot of Pourable Concrete Leveller
Pourable Concrete Leveller being poured onto old concrete floor
Pourable Concrete Leveller Pallet Packshot
Packshot of Pourable Concrete Leveller
Pourable Concrete Leveller being poured onto old concrete floor
Pourable Concrete Leveller Pallet Packshot

Pourable Concrete Leveller

SKU: FS-01141

Packshot of Pourable Concrete Leveller
Pourable Concrete Leveller being poured onto old concrete floor
Pourable Concrete Leveller Pallet Packshot
Packshot of Pourable Concrete Leveller
Pourable Concrete Leveller being poured onto old concrete floor
Pourable Concrete Leveller Pallet Packshot
£76.65 INC VAT
£63.88 EXC VAT
£76.65 INC VAT
£63.88 EXC VAT
Save £-76.65

In stock

The quick and easy way to resurface a rough, worn or pitted concrete floor into a hardwearing surface. Pourable Concrete Leveller is a high strength floor levelling compound, supplied with two primers to ensure you get the best results.

Product Features:

  • Extra strength self-levelling compound
  • Takes forklift traffic at just 3mm thick
  • Can be painted for stain resistance and easy cleaning
  • Primers included
Select Size:
Bulk Savings With Pallets

Need a large quantity? Buy in pallets to activate bulk savings.

FREE Standard Delivery*
Free standard delivery on your order when you spend over £100

FREE Standard Delivery*

Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)

Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.

*Delivery exclusions

We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.

More info

  • Floorsaver Pourable Concrete Leveller, is a remarkably strong polymer and cement based floor levelling compound which transforms a rough, worn, uneven pitted concrete floor into a heavy duty, dust free surface. The polymer in Pourable Concrete Leveller gives the extra strength needed to create a heavy duty surface that can withstand forklift traffic at just 3mm thick. It's easy to apply; simply pour it from the bucket and guide it with a trowel, it will self-level afterwards. Self levelling compound suitable for interior use. It can be left as the final finish or painted with our Epoxy Floor Paint.

    Everyday cement based/ concrete levellers are usually used as a screed under tiles or wood, whereas the Pourable Concrete Leveller is a finished, hard wearing surface that easily withstands vehicle traffic. It can also be painted to help resist staining and to make it easier to clean, or just left as it is. The two primers need to be applied to bare concrete before using the Pourable Concrete Leveller, which are provided in the pack. If applying over well bonded paint, the surface should be sanded back and only primer 2 is required.

    Please note: we cannot accept returns for this product as they are cementitious.

  • Preparation

    Step 1 - Preparation

    • Floorsaver Pourable Concrete Leveller must go onto a clean surface. If it's dusty give it a good sweep, but if it's greasy or oily clean it with floorsaver Cleaner & Degreaser.
    • If the concrete has been painted, remove as much of the paint as possible paying particular attention to any weak or poorly bonded areas. It doesn't matter if the floor is not bone dry, but it can't be wet! However, on very warm days it's best to lightly dampen the surface with water before going onto Step 2.

    Step 2 – Prime the surface with Primer 1 (unpainted/bare, porous surfaces only)

    • With a soft broom cover the entire area with the Primer 1 and leave it for around 2-3 hours, but for best results leave it overnight before applying Primer 2. Primer 1 is designed to penetrate and bind the concrete surface as well as sealing it to help prevent air bubbles appearing in the leveller.

    Step 3 – Prime the surface with Primer 2

    • After leaving Primer 1 to dry for at least 2-3 hours, preferably overnight, the Primer 2 can be applied, using the broom. Use as much as your surface needs to leave a thin film of primer covering the floor. Don’t leave any sitting or puddling on the surface. Excess Primer 2 should be swept away otherwise puddles of primer can bleed through the Pourable Concrete Leveller which can cause patchiness. As soon as you’ve applied Primer 2 you can move on to Step 4.

    Step 4 – Mixing the polymer and powder together

    • There is a bottle of polymer and a bag of powder. Just tip the polymer into the big 20kg bucket and little by little add the powder and mix it together using a Mixing Blade fitted into a slow speed electric drill. Avoid using a high speed drill as it’s messy and it will draw too much air into the mix which can cause air bubbles. As you are mixing it, be sure to remove any mix from the sides and bottom of the bucket so it’s all blended together and looks uniform in colour. As soon as it’s mixed use it straight away.

    Application

    • Pour it onto the area as evenly as possible, and using a trowel, help guide it towards the edges and corners. It’s impossible to avoid air bubbles, but these can be eliminated by using a Spiked Roller. Spike rollering should take place straight away. Don’t spike roller for more than a maximum of 20 minutes (less on very warm days) as by then the Pourable Concrete Leveller would have started to dry and you’ll be left with spike roller marks.
    • For application, the temperature should be a minimum of 15°C or above for it to dry. Avoid application in very hot conditions (over 60°C) as it will start to dry too quickly making it hard to use, and can cause problems with the overall finish.
    • 20kg covers approx. 3m² at 3mm thick.
    • Clean tools in water.
  • Specification Value
    Product usage
    • Interior
    Product shelf life 12 months, if unopened and should not be allowed to freeze.
    Product drying time Foot Traffic - 6 hours. Heavy Traffic - Vehicles and forklifts 24-36 hours. Painting - Allow 24-36 hours before applying water based paint. We do not recommend painting Pourable Concrete Leveller, if less than 3 months old, with a solvent based paint.
    Product coverage 20kg covers approx. 3m2 at 3mm thick
    Product properties Dust free
    Minimum application temperatures: 10°C
    Self Levelling Compound
    We do not recommend
    • Applying outside since it can crack while drying under certain weather conditions.
    • Using at temperatures below 10°C.
    • Leaving Pourable Concrete Leveller unpainted if aesthetics are important. It is common for any cement based product to look a little patchy, so if this is an issue it is best to paint it to achieve a nice uniform finish.
    • Using on slopes, step nosings, etc. since this product is pourable. In such cases, to overcome surface imperfections use Epoxy Repair Mortar.
    • Using at a depth of more than 10mm in one go. Pourable Concrete Leveller can be applied in layers but do not use Primer 1 between the layers only Primer 2 is needed.
    • Spike rollering for more than 20 minutes (less so on very warm days).

  • Product Information Sheet

    Download

    Safety Data Sheet - Additive

    Download

    Safety Data Sheet - Powder

    Download

    Safety Data Sheet - Primer 1

    Download

    Safety Data Sheet - Primer 2

    Download
Description

Floorsaver Pourable Concrete Leveller, is a remarkably strong polymer and cement based floor levelling compound which transforms a rough, worn, uneven pitted concrete floor into a heavy duty, dust free surface. The polymer in Pourable Concrete Leveller gives the extra strength needed to create a heavy duty surface that can withstand forklift traffic at just 3mm thick. It's easy to apply; simply pour it from the bucket and guide it with a trowel, it will self-level afterwards. Self levelling compound suitable for interior use. It can be left as the final finish or painted with our Epoxy Floor Paint.

Everyday cement based/ concrete levellers are usually used as a screed under tiles or wood, whereas the Pourable Concrete Leveller is a finished, hard wearing surface that easily withstands vehicle traffic. It can also be painted to help resist staining and to make it easier to clean, or just left as it is. The two primers need to be applied to bare concrete before using the Pourable Concrete Leveller, which are provided in the pack. If applying over well bonded paint, the surface should be sanded back and only primer 2 is required.

Please note: we cannot accept returns for this product as they are cementitious.

How to Use

Preparation

Step 1 - Preparation

  • Floorsaver Pourable Concrete Leveller must go onto a clean surface. If it's dusty give it a good sweep, but if it's greasy or oily clean it with floorsaver Cleaner & Degreaser.
  • If the concrete has been painted, remove as much of the paint as possible paying particular attention to any weak or poorly bonded areas. It doesn't matter if the floor is not bone dry, but it can't be wet! However, on very warm days it's best to lightly dampen the surface with water before going onto Step 2.

Step 2 – Prime the surface with Primer 1 (unpainted/bare, porous surfaces only)

  • With a soft broom cover the entire area with the Primer 1 and leave it for around 2-3 hours, but for best results leave it overnight before applying Primer 2. Primer 1 is designed to penetrate and bind the concrete surface as well as sealing it to help prevent air bubbles appearing in the leveller.

Step 3 – Prime the surface with Primer 2

  • After leaving Primer 1 to dry for at least 2-3 hours, preferably overnight, the Primer 2 can be applied, using the broom. Use as much as your surface needs to leave a thin film of primer covering the floor. Don’t leave any sitting or puddling on the surface. Excess Primer 2 should be swept away otherwise puddles of primer can bleed through the Pourable Concrete Leveller which can cause patchiness. As soon as you’ve applied Primer 2 you can move on to Step 4.

Step 4 – Mixing the polymer and powder together

  • There is a bottle of polymer and a bag of powder. Just tip the polymer into the big 20kg bucket and little by little add the powder and mix it together using a Mixing Blade fitted into a slow speed electric drill. Avoid using a high speed drill as it’s messy and it will draw too much air into the mix which can cause air bubbles. As you are mixing it, be sure to remove any mix from the sides and bottom of the bucket so it’s all blended together and looks uniform in colour. As soon as it’s mixed use it straight away.

Application

  • Pour it onto the area as evenly as possible, and using a trowel, help guide it towards the edges and corners. It’s impossible to avoid air bubbles, but these can be eliminated by using a Spiked Roller. Spike rollering should take place straight away. Don’t spike roller for more than a maximum of 20 minutes (less on very warm days) as by then the Pourable Concrete Leveller would have started to dry and you’ll be left with spike roller marks.
  • For application, the temperature should be a minimum of 15°C or above for it to dry. Avoid application in very hot conditions (over 60°C) as it will start to dry too quickly making it hard to use, and can cause problems with the overall finish.
  • 20kg covers approx. 3m² at 3mm thick.
  • Clean tools in water.
Technical Spec
Specification Value
Product usage
  • Interior
Product shelf life 12 months, if unopened and should not be allowed to freeze.
Product drying time Foot Traffic - 6 hours. Heavy Traffic - Vehicles and forklifts 24-36 hours. Painting - Allow 24-36 hours before applying water based paint. We do not recommend painting Pourable Concrete Leveller, if less than 3 months old, with a solvent based paint.
Product coverage 20kg covers approx. 3m2 at 3mm thick
Product properties Dust free
Minimum application temperatures: 10°C
Self Levelling Compound
We do not recommend
  • Applying outside since it can crack while drying under certain weather conditions.
  • Using at temperatures below 10°C.
  • Leaving Pourable Concrete Leveller unpainted if aesthetics are important. It is common for any cement based product to look a little patchy, so if this is an issue it is best to paint it to achieve a nice uniform finish.
  • Using on slopes, step nosings, etc. since this product is pourable. In such cases, to overcome surface imperfections use Epoxy Repair Mortar.
  • Using at a depth of more than 10mm in one go. Pourable Concrete Leveller can be applied in layers but do not use Primer 1 between the layers only Primer 2 is needed.
  • Spike rollering for more than 20 minutes (less so on very warm days).
Data Sheets

Product Information Sheet

Download

Safety Data Sheet - Additive

Download

Safety Data Sheet - Powder

Download

Safety Data Sheet - Primer 1

Download

Safety Data Sheet - Primer 2

Download

QUESTIONS & ANSWERS

Have a Question?

Ask a Question

  • whats the average coverage im m2?

    This would dpeend highly on the depth, @ 3mm it would cover 3m2

  • can this be laid over Bitumen tiles?

    Unfortunately not, the Leveller is specific for concrete surfaces only.

  • can this product be used to achieve a 6 mm thickness floor?

    Hi, this product can be applie between 3mm and 10mm in one application. at 6mm thick each 20kg bucket would cover 1.5m2

  • Can the product be polished?

    Hi, it could selaed and polished if preferred. Though the product is strong enough to be left as the wearing finish, it is worth noting that you do often get reasonable shade variation across the floor, this happens natrually due to the cement content.

  • What is the coverage

    Hi, the Pourable Concrete Leveller will cover 3m2, per 20kg @ an average of 3mm deep. Of course coverage does reduce with depth but if i can help at all, please get in touch.
    Kind Regards,
    Michael

  • How tough is this product ? I'm going to use it to level a domestic garage floor so most of the use if fairly light but i will occasionally use jacks/axle stands etc. Also it says that it needs to be used in temps of 15C, does that mean it's not going to be suitable to be laid during the autumn/winter months ? Or it will just take longer to cure ? Thx ... Andy

    Hi Andy,

    Thank you for your enquiry,  This is absolutley fine for a garage floor as it will be able to withstand vehicular movement - even forklifts,  pallet trucks etc. Ideally 15 degrees would be best althoughthis would be fine to apply at temps as low as 10 degrees - just may take a bit longer to cure, anything lower than 10 degrees could affect the curing altogether so we do not advise applying lower than this unles the area can be heated.

    If i can help further please let me know.

    Regards

    Mark

  • My garage floor has an area of approx 6 sq. metres would I need 2 of the 20kg tubs for 3mm coverage

    Hi Jim,

    Thats correct, the product will cover 3m2 @ 3mm deep, so for 6m2 you would require two. Please ensure the product is kept between 3mm and 10mm in depth, although hard wearing and paintable, it is not suitable for use where you require a feather edge.

    Kind Regards,
    Michael

  • Can this product be used on a outside drive way. Takes car trafic and all UK weather. If not can you suggest a product and how much I need to cover 25ft by 18ft drive. Thanks

    Hi, sorry but this product is for internal use only.

  • Can this product be varnished with a water based floor varnish?

    We have not tested water based floor varnishes on the Pourable Concrete Leveller. We would recommend a trial area if you proceed.

  • My floor was outside and for years but now has a roof on it. It does have a damp proof membrane but I just wanted to check that the Pourable Leveller will be fine to use on it, 2 weeks after it’s been protected from any new rain by the new roof?

    Hi David, the product will be fine provided the concrete is not saturated.  Pourable Concrete Leveller contains water so is entirely compatible with a damp surface.  

     

  • Can this product be used outside?

    I am sorry it cannot be used outside because under certain weather conditions it can crack and craze as it dries out.

  • Does this product (Pourable Concrete Leveller) come complete with the two primers, or should they be bought separately?

    It comes with two primers so you don't need to buy anything else! Our data sheet explains step by step how to use the primers.  Here's the link https://www.floorsaver.co.uk/products/pourable-concrete-leveller-20kg