Heavy Duty Marking Tape

Heavy Duty Marking Tape

In Stock

Our Heavy Duty Marking Tape is an industrial floor tape for areas where you need something thicker, stronger and longer lasting than conventional tapes. This is ideal for maintaining distancing, indicating hazardous areas or safe escape routes both indoors and outdoors to improve the safety. Can be used in domestic or commercial environments when you need something better than standard tapes. It is available in multiple colours and sizes.

Ultra durable for heavily trafficked areas

Hard wearing self adhesive backing

Easy to clean

Long lasting and consistent colour

Water resistant

Quantity:

Surface Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer

Priming
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer

Application
If appearance is critical we recommend the application of a small trial area first

Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient

Adhesion
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

Primer required Yes if on dusty, porous or gritty surfaces
Roll length (m) Up to 30m
Depth (mm) 25, 50, 75, 100
Interior/exterior usage Suitable for interior or exterior locations
Properties Self adhesive, ideal for indicating hazardous areas
Surfaces Floor, ramps or steps
Max operational temperature 70℃
Application Immediately ready for traffic

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question