Hazard Paint Anti Slip - 2.5L

Hazard Paint Anti Slip - 2.5L

In Stock

The perfect paint for highlighting hazards with long lasting, slip resistant markings, indoors and outside - with the lowest price guaranteed.

Designed to improve safety with slip resistant, durable and accurate markings, floorsaver hazard marking paint is easy to apply, suitable for most surfaces and stands tough against the wear of heavy traffic.

The lowest price - guaranteed!

Excellent slip resistance

Apply in one coat

Ideal for bare concrete, existing bonded paint, masonry and metal

Also available:




Floorsaver Hazard Paint comes in a bright yellow colour which is ideal for internal line marking, hatching, highlighting kerbs, step edges, pillars and obstructions throughout the workplace.

You might also like:


How to Use

Step 1 - Preparation:

  • Surfaces should be clean, dry and dust free.
  • If using as a line marker or to paint a kerb or minor obstruction (rather than painting a larger area), the best way of cleaning your floor is probably by using a stiff or wire brush and sweeping away any dust. Grease or oil can be removed by using Floorsaver Cleaner & Degreaser.
  • For larger areas of floor - On bare, reasonably clean concrete wash with Floorsaver Floor Etcher - this cleans and keys the surface. On greasy or previously painted floors clean with Floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. New concrete should be at least 2 months old and always washed with Floorsaver Floor Etcher to reduce alkalinity.


Step 2 - Repairs:

  • Fill small surface holes and cracks using Floorsaver Crack & Hole Filler. Use Floorsaver Mouldable Concrete Filler if you have to repair a step nosing or kerb edge.


Step 3 - Application:

  • Check the surface is dry before painting and that the temperature is a minimum of 15„ƒ.
  • Concrete or similar surfaces should be sufficiently porous for the product to 'soak in' to get a key.
  • If using a paint brush one coat should be sufficient, but if you are using this over a darker previously painted floor, or applying it by roller, allow for two coats to get a solid colour. Leave for 16 hours (at 15„ƒ-20„ƒ) before applying the second coat. The second coat must be applied within 5 days of the first coat.
  • If using Floorsaver Hazard Paint Anti Slip, tip the small tin of Anti Slip Aggregate into the tin and stir thoroughly using a wooden batten or similar. Use the whole tin of aggregate for the 5L pack size and half for the 2.5L
  • Clean equipment with White Spirit.

    Technical Spec

    Single pack polyurethane
    Interior/ Exterior usage Suitable for interior and exterior use
    Coats Only one coat is normally sufficient (unless you are using this over a darker previously painted floor, or applying it by roller, in which case allow for 2 coats to get a solid colour)
  • 2.5L covers up to 20m2 per coat
  • 5L covers up to 40m2 per coat
  • Minimum application temperature
    Drying times At 15„ƒ-20„ƒ:
    • Touch Dry - 10 hours
    • Light Traffic - 24 hours
    • Full Use at 36 hours
    • Recoat - leave first coat 16 hours before applying the second coat if required. The second coat must be applied within 5 days for the first coat.
    Floorsaver Hazard Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
    Shelf Life 12 months, if unopened. Do not allow to freeze


    Product Information Sheet


    Anti Slip Aggregate Safety Sheet


    Safety Sheet



    Have a Question?

    Be the first to ask a question about this.

    Ask a Question