Glow In The Dark Safety Grip - Anti Slip Stair Tread Cleat - 150mm x 610mm

Glow In The Dark Safety Grip - Anti Slip Stair Tread Cleat - 150mm x 610mm

In Stock

A glow in the dark anti slip cleat for a clear, guiding step to safety. This glow in the dark tape has been manufactured using the latest technology in photo-luminescence to ensure stairways are illuminated well enough in order to be guided to safety. It has been designed to mark exit paths to aid in evacuation of buildings in the event of power failure, and to illuminate hazardous areas in low-level lighting conditions. 


Non-toxic and free from any phosphorous or radioactive material

Anti slip

Photo-luminescent tape takes very little time to charge by absorbing artificial or natural light

Resin-bonded grit with a glow in the dark pigment bonded to a pressure-sensitive PVC backing

Surface Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.

Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.

If appearance is critical we recommend the application of a small trial area first.

Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.

Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

Size Width: 610mm, Depth: 150mm
Appearance Glow in the dark green
Primer required Safety tape edge sealer or safety tape primer
Interior/exterior usage Suitable for interior or exterior surfaces
Properties Tape glows for up to one hour after charging, ideal for fire exit routes or around hazards
Surfaces Concrete, wood, metal, painted or varnished surfaces


Have a Question?

Be the first to ask a question about this.

Ask a Question