Next Day Delivery currently unavailable | More information >

Extra Coarse Safety Grip - Anti Slip Tape

Extra Coarse Safety Grip - Anti Slip Tape

In Stock

The worlds most durable and coarsest anti slip tape has been designed for use in heavy duty industrial environments. Areas that are exposed to mud, clay and even ice and snow will benefit from Extra Coarse Safety Grip tape as an anti-slip solution.

 

This has been made from a rare and very big type of aluminium oxide                      granule.

The heavy grit requires a special plastic film to be able to carry it without                 splitting.

The adhesive is designed to adhere onto often difficult substrates, such as               low energy powder coat, that are notoriously problematic for normal                         adhesives.

Quantity

Description

How to Use

Surface preparation: Wash the area to remove any grease, oil, dirt, or other contaminates, rinse and allow to dry. The Safety Tape can be applied to any smooth surface such as concrete, wood, metal, tile, terrazzo, and painted or varnished surfaces. Use the Safety Tape Primer on dusty concrete, porous, or other weak surfaces to ensure better adhesion.

Application: Apply only when air and surface temperature are above 50°F (10℃). The surface area must be clean and dry at the time of application. On stair trends and landings, apply the Safety Tape at least 3/8" back from the edge to avoid edge curl. When applying a strip of Safety Tape, do not peel off entire backing all at once. Rather, peel back about 2" from the end of the strip to expose the adhesive and position in place. Press down firmly, then remove the remainder of backing from the Safety Tape while affixing it to the surface. Avoid stretching the tape when placing it into position. The Safety Tape may be peeled back up to reposition it if necessary, but try to avoid repeating this action. Once in place, firmly press down on the Safety Tape by hand or with your foot to secure it. The Safety Tape is suitable to support light foot traffic immediately, however it requires 24 hours for the adhesive to achieve full cure.

Technical Spec

Interior/exterior usage Suitable for interior and exterior locations
Uses heavy duty industrial environments. Also can be used in areas which are exposed to mud, clay and even ice and snow due to its high anti slip properties

QUESTIONS & ANSWERS

Ask a Question
  • A: The best way is to get a long handled scraper with a sharp blade and knock it off. You will be left with a residue which you can try to remove with White Spirit.