Epoxy Floor Paint - 2.5L

Epoxy Floor Paint - 2.5L

In Stock

An industrial grade, heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean  - with the low prices guaranteed.

 

Watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

 

Low prices - guaranteed!

Use in warehouses, workshops, showrooms and factories with heavy wear and tear

Top choice for garage floors as it won't mark from hot tyres

Use on bare concrete or existing well bonded paint

Water based formulation that is easy to clean

With a two part epoxy paint it’s not practical to apply two coats with just one tin – please refer to the ‘Technical Spec’ tab

Also available:

Epoxy Floor Paint - 5L

An industrial grade, heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean.

 

Watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

 

Use in warehouses, workshops, showrooms and factories with heavy wear and tear

Top choice for garage floors as it won't mark from hot tyres

Use on bare concrete or existing well bonded paint

Water based formulation, virtually solvent free

Easy to clean

 

Also available:

Description

What you get:

4L Coloured Curing Agent in a 5L tin
1L  Clear Resin
(These are mixed together to make 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish. 

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 5L is equivalent to 6.6kg

You might also like: 

 

How to Use

Step 1 - Preparation:

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
  • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
  • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

 

Step 2 - Repairs:

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

 

Step 3 - Application:

  • Apply at a minimum temperature of 15 ℃.
  • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
  • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
  • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
  • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
  • Use a brush around the edges and a medium pile roller for the floor.
  • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.
Where to use

 

  • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint. 
  • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic. 
  •  

    Technical Spec
    Interior/exterior usage Suitable for indoor use only
    Properties
    • Virtually odourless - can be applied in confined areas
    • Good general chemical resistance
    Minimum application temperature  15
    Max operational temperature 60 ℃
    Curing times

    At 15 ℃-20

    ℃:

    • Recoat - 12 hours. The second coat should be applied within 5 days of the first coat.
    • Walk on - 16-24 hours
    • Cars - 2-3 days
    • Full hardness, scratch & chemical resistance - 7 days
    Coverage
    • 5L / 6.6kg covers up to 30m² per coat
    • 2.5L / 3.3kg covers up to 15m² per coat
    Coats required 2. Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 5L tin can’t be used for 2 coats. It will cover 30m2 with one coat, but if you have for example, 15m², you can’t use half the 5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin. This is why we also make a 2.5L size. This covers 15m² with one coat, so select two of these if you want to apply 2 coats to an area of up to 15m².

    You can combine 5L (30m²) and 2.5L (15m²) for areas which are not multiples of 30m² in size and more than one coat is required. For example, to cover 45m² with 2 coats use 1 x 5L and 1 x 2.5L for the first coat and same again for the second. If you have any questions please let us know.

    Usable working time ( at 15 ℃) 2 hours
    Shelf Life 12 months, if unopened, and should not be allowed to freeze

     

    We don't recommend:

    • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
    • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
    • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
    • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
    • Applying to metal since it can cause rusting.
    Data Sheets

    Product Information Sheet

    Download

    Resin Safety Sheet

    Download

    Curing Agent Safety Sheet

    Download

    18783453642821

    45623539171606

    45623539204374

    45640256749846

    45640256782614

    45640256848150

    45640256880918

    45640256913686

    Epoxy Floor Paint - 2.5L

    An industrial grade, heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean  - with the low prices guaranteed.

     

    Watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

     

    Low prices - guaranteed!

    Use in warehouses, workshops, showrooms and factories with heavy wear and tear

    Top choice for garage floors as it won't mark from hot tyres

    Use on bare concrete or existing well bonded paint

    Water based formulation that is easy to clean

    With a two part epoxy paint it’s not practical to apply two coats with just one tin – please refer to the ‘Technical Spec’ tab

    Also available:

    Description

    What you get:

    2L Coloured Curing Agent in a 2.5L tin
    0.5L  Clear Resin in a 1L tin
    (These are mixed together to make 2.5L of paint)

    Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish. 

    Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

    The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

    It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

    For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

    NB: 2.5L is equivalent to 3.3kg

    You might also like: 

       

      How to Use

      Step 1 - Preparation:

      • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
      • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
      • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

       

      Step 2 - Repairs:

      • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

       

      Step 3 - Application:

      • Apply at a minimum temperature of 15 ℃.
      • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
      • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
      • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
      • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
      • Use a brush around the edges and a medium pile roller for the floor.
      • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.
      Technical Spec
      Interior/exterior usage Suitable for indoor use only
      Properties
      • Virtually odourless - can be applied in confined areas
      • Good general chemical resistance
      Minimum application temperature  15
      Max operational temperature 60 ℃
      Curing times

      At 15 ℃-20℃:

      • Recoat - 12 hours. The second coat should be applied within 5 days of the first coat.
      • Walk on - 16-24 hours
      • Cars - 2-3 days
      • Full hardness, scratch & chemical resistance - 7 days
      Coverage
      • 5L / 6.6kg covers up to 30m² per coat
      • 2.5L / 3.3kg covers up to 15m² per coat
      Coats required 2. floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know.
      Usable working time ( at 15 ℃) 2 hours
      Shelf Life 12 months, if unopened, and should not be allowed to freeze

       

      We don't recommend:

      • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
      • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
      • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
      • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
      • Applying to metal since it can cause rusting.
      Data Sheets

      Product Information Sheet

      Download

      Resin Safety Sheet

      Download

      Curing Agent Safety Sheet

      Download

      18783471173701

      18783471206469

      Epoxy Floor Paint Anti Slip - 5L Epoxy Floor Paint Anti Slip - 2.5L

      Useful Information

      Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

      If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.

      • Here’s how we work it out:
      • Area to be painted: 45m² with two coats (we recommend two coats for the best result)
      • Tins needed: 2 x 5L and 2 x 2.5L
      • Why: Use 1 x 5L and 1 x 2.5L for the first coat; and the same again for the second

      Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.

      Got It
      How it Works
      Calculate
      • Tins

      • Tins

      What you get:

      2L Coloured Curing Agent in a 2.5L tin
      0.5L  Clear Resin in a 1L tin
      (These are mixed together to make 2.5L of paint)

      Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish. 

      Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

      The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

      It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

      For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

      NB: 2.5L is equivalent to 3.3kg

      You might also like: 

         

        Step 1 - Preparation:

        • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
        • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
        • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

         

        Step 2 - Repairs:

        • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

         

        Step 3 - Application:

        • Apply at a minimum temperature of 15 ℃.
        • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
        • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
        • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
        • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
        • Use a brush around the edges and a medium pile roller for the floor.
        • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.
        Interior/exterior usage Suitable for indoor use only
        Properties
        • Virtually odourless - can be applied in confined areas
        • Good general chemical resistance
        Minimum application temperature  15
        Max operational temperature 60 ℃
        Curing times

        At 15 ℃-20℃:

        • Recoat - 12 hours. The second coat should be applied within 5 days of the first coat.
        • Walk on - 16-24 hours
        • Cars - 2-3 days
        • Full hardness, scratch & chemical resistance - 7 days
        Coverage
        • 5L / 6.6kg covers up to 30m² per coat
        • 2.5L / 3.3kg covers up to 15m² per coat
        Coats required 2. floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know.
        Usable working time ( at 15 ℃) 2 hours
        Shelf Life 12 months, if unopened, and should not be allowed to freeze

         

        We don't recommend:

        • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
        • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
        • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
        • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
        • Applying to metal since it can cause rusting.

        Product Information Sheet

        Download

        Resin Safety Sheet

        Download

        Curing Agent Safety Sheet

        Download

        QUESTIONS & ANSWERS

        Ask a Question
        • A: It can be thinned with water, but we would not recommend it. The product should be mixedin full and used in the ratios supplied. If you would like some help with your project, please give us a call on 0345 4509888

        • A: Usually 2/3 working days, so sometimes sooner if we can.

        • A: Hi,

          If this surface is not previoisly coated then it may be that you have waterproof or powerfloated concrete. I am afraid these types of finish would require heavy mechanical abrading, by shot blasting and/or diamond grinding to remove the top of the concrete and open the pores up to allow water to soak in. If water cannot soak in, i am afraid out paint won't be able to either. The paint would simply dry across the surface but not actually bind and then come up almost immediately.

          If mechanical abrasion is not an option, there are specifically desigend primers for power floated concrete. Though i am afraid these are specialist product and can be quite expensive.

          I hope this helps, but if you would like to send in some photos or give me a call, please get in contact on 0345 450 9888.

          Kind Regards,
          Michael

        • A: Hi,

          We dont make our colours specifically to any shade, only our own. Though i would say the nearest would be our Mid Grey, which is a close match to RAL 7037, if that helps.

          Our paint can be applied over existing paint, it would be a good idea to clean and sand back the surface of the old paint (not to remove it, but simply to gain some texture). This will help our product to bond correctly.

          Kind Regards,
          Michael

        • A: There is no reason why this would not be suitable for a pub toilet. Though it would not be completely resistant to urine and other staining, (similar to other paint systems), it would form a good seal and be quite hard wearing. It is also the cheapest available epoxy paint on the market so a very cost effective way of maintaining the look. Though I’m afraid it would still need over coating regularly in this environment.

        • A: Hi, our epoxy floor paint has a thickness of around 200-250 microns when applied in two coats, that’s essentially 0.2 of a millimetre. I am afraid it will not fill the holes and undulations on the surface. These would need to be addressed separately before painting if you were hoping to achieve a smooth painted finish.

        • A: Hi, unfortunately not, sorry.  We do not have any product suitable for a tiled surface as all of our paint coatings require a surface with porosity such as concrete and asphalt in order for it to adhere.

        • A: This is a water based epoxy paint coating, designed to be applied as a floor paint over concrete or similar surfaces. I am afraid the decorative style resins you are referring to are quite different and this would not work for that type of application.   However, should you ever wish to paint your garage floor this would be perfect for you!

        • A: This is a water based product that is low odour and has low VOC’s.  If you are applying it to wooden floorboards the water content might raise the grain of the wood, but this is ok providing you sand it between coats to get a smooth finish.

        • A: Unfortunately not.  Epoxy Floor Paint can fade under UV rays, instead we'd recommend our Floorsaver Car Park Paint.

        • A: A medium pile sheepskin roller is fine. It can be cut in with a paint brush.