Cleaner & Degreaser - 25L

Cleaner & Degreaser - 25L

In Stock

Effortlessly remove grease and grime with this heavy duty, biodegradable cleaner for a wide range of stains and surfaces - with the lowest price guaranteed.

A great floor preparation solution for cleaning heavy grease, stubborn soils and oil deposits before sealing, coating or painting floors, floorsaver Cleaner & Degreaser cleans deep without damage to the floor finish.

Watch our how to apply video here: https://www.youtube.com/watch?v=CSnwgtSowHE

The lowest price - guaranteed!

Versatile - good all round cleaner

Perfect for bare concrete, sealed concrete, tiles, vinyl or any painted surface.

Tough on stains, easy on the environment

Quantity:

How much do I need? How much do I need?

Do you know the size of the area?

Width M

Length M

Area M² Recommended Coats Calculate

Tins

Description

floorsaver Cleaner & Degreaser is supplied in concentrate form. Use undiluted it will break down heavy grease and oil on concrete floors prior to painting. This biodegradable floor cleaner is water based and surprisingly powerful. Its low odour and virtually solvent free formulation will ensure the best possible preparation to ensure your floor paint sticks and lasts.

How to Use

Step 1: Preparation:

Make sure the floor is dry - Floorsaver Cleaner & Degreaser will be much more effective when applied to a dry surface.
Sweep the (dry) floor to remove dust and loose dirt.

Step 2: Application:

Apply the product to the floor, either as concentrate or diluted as described above.
Distribute using a broom and leave for a few minutes to soften grease and dirt.
Scrub with a broom, flush with clean water and allow to dry.

Tip - If using Floorsaver Floor Paint the floor must be allowed to dry out. Floorsaver Epoxy Floor Paint can be applied to a surface which is still slightly damp as a result from cleaning.

Warning: Floorsaver Cleaner & Degreaser is biodegradable, but a mixture of this product with surface debris, such as oil should not be disposed of via a rainwater drain or open water courses.

Please dispose of this using a wet vacuum and regard as chemical waste.

Technical Spec

Properties	Water based and biodegradable
Interior/exterior usage	Low odour - safe for use inside and outside
Coverage	Use undiluted for heavy grease - 5L treats 30m² & 25L treats 150m² Use diluted with 20 parts water for general cleaning preparation - 5L treats 600m² & 25L treats 3000m² Use diluted with 40 parts water for cleaning and maintaining existing painted floors - 5L treats 1000m² and 25L treats 5000m²
Uses	Use on bare concrete, previously painted floors and on machinery
Shelf Life	12 months, if unopened and should not be allowed to freeze

Data Sheets

Product Information Sheet

Download

Safety Sheet

Download

QUESTIONS & ANSWERS

Ask a Question

A: Hi, new concrete should be left for around 6-8 weeks to fully cure and then etched using Floorsaver Floor Etcher. This will remove all the laitance (a weak dusty layer that forms on new concrete) and also provide a good key for a paint to bond to. As it's already painted you will need to remove the weak layer of paint (perhaps using a wire brush) and hopefully get back to bare concrete. If you manage to remove all the paint then use the Floor Etcher, but if you have a mixture of painted areas and bare concrete, it's probably easier to just wire brush everything and not use the etcher. You just need to make sure the dust is removed,and that it's clean and dry and that you have a good key for the paint to bond to. If you need an anti slip paint take a look at our Exterior Floor Paint. One coat is all you normally need as it's quite thick and covers well.