Coarse Safety Grip - Anti Slip Stair Tread Cleat - 150mm x 610mm
In Stock
Stocktake notice: Orders may take longer to be despatched due to stocktake. We apologise for any inconvenience caused and appreciate your understanding.
0
x
Surface Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.
Priming
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.
Application
If appearance is critical we recommend the application of a small trial area first.
Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.
Adhesion
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.
Size | Width: 610mm, Depth: 150mm |
Primer required | Safety tape primer and safety tape edge |
Interior/exterior usage | Suitable for interior and exterior locations |
Surfaces | Can be attached to any type of step; concrete, wood, stone , steel (indoors or outdoors) |
Application (curing time) | Full cure in 48hrs |
Application condition | Clean and dry |
A: Hi, yes, these can be used on external metal staircases. We advise that the surfaces are just clean and dry prior to application.
A: Hi, this product uses Aluminium Oxide bonded to a heavy duty backing with a superior adhesive. On a step in a domestic environment it should last several years, but it really depends upon the amount of use it gets. Our product is amongst the best of its type, i.e. a flexible self adhesive product. Sorry we cannot be more precise.
A: Hi, yes you can as long as the UPVC is smooth, clean and dry. It's quite gritty so not ideal for walking on bare foot, but if you have shoes on you will be fine!
A: Yes, very! Just a pair of sharp scissors is all you need, but just to be aware the edges are round, so if you cut them you will lose that rounded effect.
"Dear floorsaver or should I say Job Saver! I would truly recommend your paint and fantastic service to go beyond the norm!"
Trusted Customer, Floor Paint – 5L
★★★★★