Rust-Oleum Satin Finish Furniture Paint

Rust-Oleum Satin Finish Furniture Paint

In Stock

High pigment, mid-sheen finish

No priming or sanding required

Suitable for furniture, doors & trims

Certified Toy Safe

Save even further with Multi-buy

*Discount applied at checkout

Buy 1 Buy 2 - 10% off Buy 3 - 20% off
£12.50 each £11.25 each £10.00 each

Also available:

Make sheening examples of your interior furniture, doors and trims with Rust-Oleum Satin Finish Furniture Paint.

The water-based, high pigment furniture paint adds a timeless mid-sheen finish to your favourite desk, wardrobe or chest of drawers.

Easy to apply, the paint effortlessly covers wood (bare or painted), brick, stone, plaster or any suitably primed rigid surface. No priming or sanding necessary on most surfaces. And no need to wax or lacquer your finished paint work. The result is lustre, without fluster.

  • Upcycle furniture, doors and skirting boards by adding a timeless, mid-sheen lustre with Rust-Oleum Satin Furniture Paint
  • With no priming or sanding necessary on most surfaces, this high pigment, water based paint is perfect for use on wood, brick, stone and plaster or any suitably primed rigid surface such as metal or plastic
  • Easy to apply by brush, roller or electric sprayer, add a subtle, contemporary sheen to wardrobes, desks or an old chest of drawers for a cost-effective refresh. If spraying, paint should be diluted with water by 10-20% as required. Two coats are recommended
  • This easy to use furniture paint provides exceptional coverage in a single coat with limited preparation time- simply ensure your surfaces are smooth, dry and free from contaminants
  • Rust-Oleum Satin Furniture Paint is certified Toy Safe comes in eco friendly packaging and is made in the UK, available in a 750ml tin


You might also like:

Step 1 - Preparation:

For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood should be sanded before painting.


Step 2 - Application:

Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by bush, apply evenly following the grain of the wood. If rollering, use a short nap mohair roller. Two coats recommended.


Step 3 - Drying Time:

Touch dry in 1 hour. Handle after 4 hours. Apply a second coat after 4 hours, if necessary. Full hardness after 4 hours.

Technical Data Sheet


Safety Data Sheet



Ask a Question
  • A: They are supplied in a 750ml Tin.