Asphalt Crack Filler - 5L

Asphalt Crack Filler - 5L

In Stock

Floorsaver Asphalt Crack Filler is a flexible rubberised bitumen formula, perfect for ensuring small cracks don’t become large potholes.

Super easy-to-use, just pour the quick drying repair compound from a spouted can and pour into cracks up to 25mm wide.


Fast curing – dry in 2-4 hrs

Mix and pour – no primer required

Easy fix – prevents further damage

Prevent further damage to your cracked asphalt surfaces with floorsaver Asphalt Crack Filler. Ideal for internal or external use, this product is recommended for car parks, playgrounds or walkways to address cracks early and stop water ingress from accelerating deterioration.

Make repairs simple - just pour the liquid from a watering can or spouted container straight into the cracks.

Ideal for:

  • Carparks
  • Driveways
  • Pavements/Walkways
  • Playgrounds


Step 1 - Preparation:

  • Minimal preparation is required. floorsaver Asphalt Crack Filler is easy to use. Sweep or scrape out any loose stuff from the hole and that's about it.


Step 2 - Mixing:

  • Still well before use
  • Decant into a spouted can


Step 3 - Application:

In order to ensure proper drying time, please avoid using the product in wet or cold (below 5ºC) conditions. Although some dampness may be tolerated, it is best for the crack to be reasonably dry.

Cracks up to 3mm wide: Using a spouted can (or watering can), apply the Asphalt Crack Filler to fill in the cracks, ensuring that any excess liquid that overflows is brushed out to create a thin film. Allow the filler to dry and then dust with fine sand or cement to remove any remaining tackiness.

Cracks 3mm - 25mm wide: Prepare the crack by applying a brush coat of floorsaver Asphalt Crack Filler to the sides. Create a slightly stiff mortar by mixing Asphalt Crack Filler with damp sand. Use a trowel to fill the crack and smooth it out. After the mortar dries, remove any remaining tack by dusting with fine sand or cement.


Interior/exterior usage Suitable for interior and exterior use
Coverage 5 litres will fill 100 linear metres of cracks at 5mm wide & 5mm deep.
Suitable for Asphalt, tarmac
Setting Time

Approximately 2 - 4 hours should be allowed for cracks up to 3mm and 6 -10 hours for cracks up to 25mm.

    Shelf Life Shelf Life - 12 months, if unopened and should not be allowed to freeze


    We don't recommend:

    • This product is designed for use on bitumen based surfaces. It could soften surfaces which contain coal tar. If in doubt, apply a test area and check after 24 hours that no softening has occurred.

    Product Information Sheet


    Safety Sheet



    Have a Question?

    Be the first to ask a question about this.

    Ask a Question