A fast drying pump applied underlayment, for levelling of concrete floors before the installation of floor coverings e.g. vinyl, carpets, ceramic tiles, wood block, linoleum or cork.

Uses

• Suitable for floors in office buildings, shops, public buildings, schools, hospitals, airports and prisons. Isocrete Self Level Plus is laid at 3 – 30mm, however an 8mm average thickness is a typical expectation on a reasonably level base.
• Isocrete Self Level Plus provides good resistance to impact, point loading and abrasion - making it suitable as a temporary work surface for following trades prior to vinyl being applied.
• Isocrete Self Level Plus can be used in composite with graded, round quartzite gravel for deep section fills (20 - 150mm deep). 

Step 1 - Preparation

• Prepare the surface by enclosed shot-blasting or scarification. Finish edges with a Trowel or Steel Float. Remove all residues to leave a dry and dust free open textured surface. Seal all openings and holes to prevent leaks.

Step 2 - Mixing

• Pour the powder into a mixing container adding 4.5 - 4.8 litres of water (per 25kg). Stir with our Mixing Blade until a smooth consistency is achieved. Mix with our Mixing Blade until a smooth consistency is achieved.

Step 3 - Application

• Lay the mixed screed in a continuous operation on the primed surface.

• Release small air bubbles with a spiked roller or tee-bar within 5 minutes of placing.