Conformable Safety Grip - Anti Slip Stair Tread Cleat - 150mm x 610mm

Conformable Safety Grip - Anti Slip Stair Tread Cleat - 150mm x 610mm

In Stock

Floorsaver Conformable Safety Grip Anti Slip Stair Tread Cleat is a tough anti slip cleat for durbar plate, chequer plate, diamond tread and other surfaces where the standard safety grip cleat would not be applicable.

 

Extremely tough, resin bonded aluminium oxide which provides a long lasting gritty finish

Suitable for concrete, wood, brick, stone and metal

Water resistant

 

Quantity:

  • This non slip self adhesive tread can help to improve safety on profiled metal, diamond plate and profiled slabs.
  • Self adhesive flexible aluminium backing easily conforms to textured surfaces
  • High flame retardancy levels

Surface Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.

Priming
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.

Application
If appearance is critical we recommend the application of a small trial area first.

Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.

Adhesion
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

Size Width: 610mm, Depth: 150mm
Appearance Black, yellow or hazard
Primer required Safety tape primer for dusty or porous surfaces
Interior/exterior usage Suitable for interior or exterior surfaces
Properties Self-adhesive, flexible. suitable for profiled surfaces, anti slip
Surfaces Concrete, wood, brick, stone and metal
Application condition Clean and dry

QUESTIONS & ANSWERS

Ask a Question
  • A: Yes this can be mopped/cleaned to remove dirt, it would also be worth sealing the edges of the tape with our  Edge Fix Safety Tape Edge Sealer to avoid any water / dirt ingress