Safety Grip - Anti Slip Tape - 610mm x 9.1m

Safety Grip - Anti Slip Tape - 610mm x 9.1m

In Stock

An industrial floor tape which provides a non slip surface along with high visibility. This is ideal for indicating hazardous areas or safe escape routes both indoors and out to improve the safety within your facility. Perfect for use in domestic or commercial environments. It is available in multiple colours and sizes.

Watch our how to apply video here:

Tough mineral grit for great slip resistance and long life

Easy and highly effective way to improve safety

Tough aluminium oxide grit for great slip resistance and long life

Can be used for additional slip protection on steps or to cover entire walkways

Long lasting and consistent colour

Water resistant 

Surface Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.

Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.

If appearance is critical we recommend the application of a small trial area first.

Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.

Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

Primer required Yes if on dusty, porous or gritty surfaces
Roll length (m) 9.1
Depth (mm) 610
Interior/exterior usage Suitable for interior or exterior locations
Properties Self adhesive, ideal for indicating hazardous areas
Surfaces Floor, ramps or steps
Max operational temperature 70°
Application Immediately ready for traffic