Safety Grip - Anti Slip Tape

In Stock

An industrial floor tape which provides a non slip surface, along with high visibility. This is ideal for indicating hazardous areas or safe escape routes both indoors and out to improve the safety within your facility. Perfect for use in domestic or commercial environments. It is available in multiple colours and sizes.

Watch our how to apply here: https://youtu.be/qCF7wEPHCFE

Easy and highly effective way to improve safety

Tough aluminium oxide grit for great slip resistance and long life

Can be used for additional slip protection on steps or to cover entire walkways

Long lasting and consistent colour

Water resistant

Quantity:

Surface Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer

Priming
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer

Application
If appearance is critical we recommend the application of a small trial area first

Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient

Adhesion
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

Primer required Yes if on dusty, porous or gritty surfaces
Roll length (m) Up to 18.3
Depth (mm) 25, 50, 75, 100, 150, 300, 500, 1000
Interior/exterior usage Suitable for interior or exterior locations
Properties Self adhesive, ideal for indicating hazardous areas
Surfaces Floor, ramps or steps
Max operational temperature 70℃
Application Immediately ready for traffic

QUESTIONS & ANSWERS

Ask a Question
  • A: Safety Grip Anti Slip Tape is perfect for decking outside. The decking must be clean and dry before application, and be primed with Water Based Primer (if being used on porous surfaces) to increase adhesion.

  • A: Safety Grip Tape can be applied to chequer plating; but we have a better product for this type of application, our Conformable Safety Tape. This is still just as tough, but is designed for profiled surfaces and will conform to textured surfaces such as chequer plating so I would use this and not the standard Safety Grip tape.

  • A: Hi, a better product for you would be Aqua Safe - https://www.floorsaver.co.uk/products/aqua-safe-waterproof-anti-slip-tape?_pos=1&_sid=a6fbe1a2a&_ss=r – this is a waterproof non slip tape and suitable for tiles in a bathroom. It would just need to be clean and dry before application and best to keep dry for 48 hours.   It has a non slip surface applied to the tape to provide slip resistance and can be used on floors, tiles, and most surfaces and is used in shower rooms regularly.

  • A: Hi, this is a self-adhesive product that may leave some adhesive residue on the surface.  If the surface is smooth then removing may be a possibility.  We have a product called Cleaner & Degreaser, this is a good cleaning product for removing oily contamination on floors (https://www.floorsaver.co.uk/collections/preparation/products/cleaner-degreaser-5l).