Safety Grip - Anti Slip Tape - 610mm x 9.1m
SKU: FS-00279
In stock
Product Features:
- Easy and highly effective way to improve safety
- Tough aluminium oxide grit for great slip resistance and long life
- Can be used for additional slip protection on steps or to cover entire walkways
- Long lasting and consistent colour
- Water resistant
FREE Standard Delivery*
Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)
Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.
*Delivery exclusions
We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.
Collapsible content
-
An industrial floor tape which provides a non slip surface along with high visibility. This is ideal for indicating hazardous areas or safe escape routes both indoors and out to improve the safety within your facility. Perfect for use in domestic or commercial environments. It is available in multiple colours and sizes.
-
Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.
Priming
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.Application
If appearance is critical we recommend the application of a small trial area first.
Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.
Adhesion
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas. -
Specification Value Product usage - Interior
- Exterior
Maximum operational temperature 70°C Product properties Self adhesive, ideal for indicating hazardous areas Product applications Immediately ready for traffic Size Roll length (m) 9.1
Depth (mm) 610Surfaces Floor, ramps or steps
Collapsible content
Description
An industrial floor tape which provides a non slip surface along with high visibility. This is ideal for indicating hazardous areas or safe escape routes both indoors and out to improve the safety within your facility. Perfect for use in domestic or commercial environments. It is available in multiple colours and sizes.
How to Use
Preparation
Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.
Priming
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.
Application
If appearance is critical we recommend the application of a small trial area first.
Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.
Adhesion
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.
Technical Spec
Specification | Value |
---|---|
Product usage |
|
Maximum operational temperature | 70°C |
Product properties | Self adhesive, ideal for indicating hazardous areas |
Product applications | Immediately ready for traffic |
Size |
Roll length (m) 9.1 Depth (mm) 610 |
Surfaces | Floor, ramps or steps |