Floor Paint Matt Anti Slip - 5L

Floor Paint Matt Anti Slip - 5L

In Stock

The best value, slip resistant and hard-wearing concrete Floor Paint money can buy - with the lowest price guaranteed.

floorsaver concrete Floor Paint is easy to use and great for improving the look of worn floors. It will give you a floor that looks great, is easy to clean and will last for years.

The lowest price - guaranteed!

Use it on most surfaces - concrete, wood, stone and cement

Great for workshops, factories and warehouses

Stands up to oil and grease

Also available:




Two coats of floorsaver concrete Floor Paint provide a matt finish that's easy to clean. It protects, seals and dustproofs internal concrete floors and can be applied to bare concrete or existing well bonded paint. If you're re-coating an existing paint of a similar colour, one coat should do the job.

You might also like:

How to Use

Step 1 - Preparation:

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface. On greasy or previously painted floors clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity.


Step 2 - Repairs:

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Concrete Filler can be used if you want a curved edge, such as a stair nosing, etc.


Step 3 - Application:

  • Check the floor is dry before painting and that the temperature is a minimum of 15 ℃.
  • Stir the paint thoroughly.
  • Do not thin.
  • Tip into a roller tray.
  • Cut in around edges with a brush.
  • Apply to the floor area using a paint roller, working well into the surface. Bare concrete should be sufficiently porous to allow the first coat to sink in.
  • Clean equipment with White Spirit.

    Technical Spec

    Interior/exterior usage For interior use only
    Uses Suitable for bare concrete or existing well bonded paint, wood and most metal
    Properties Resists spills of oils and grease
    Coats 2 coats usually required, although 1 coat may be enough if painting over an existing floor paint of a similar colour
    • 5L covers up to 40m² per coat
    • 2.5L covers up to 20m² per coat
    Drying times

    At 15-20 ℃:

    • Recoat - 16 hours (if there is a time lapse between coats, the second coat must be applied within 5 days of the first coat)
    • Touch Dry - 10 hours
    • Light Foot Traffic - 24 hours
    • Full Use - 36 hours. Please check that the paint has fully cured before putting into full use
    Minimum application temperature 15 ℃
    Applications Tough enough for use in warehouses, workshops and for general industrial use
    Shelf life Shelf Life - 12 months, if unopened. Do not allow to freeze.


    We don't recommend:

    • Using this product in areas where cars are parked - instead use floorsaver Epoxy Floor Paint.
    • Using outside.
    • Applying to self-levelling floor screeds.
    • Applying to concrete contaminated with oil, grease, fats or wax.
    • Applying to hard, smooth, very dense or power floated concrete where the paint can't soak into the surface. If in doubt tip a cup of water onto the floor and see if it disappears.


    Product Information Sheet


    Anti Slip Aggregate Safety Sheet


    Safety Sheet



    Have a Question?

    Be the first to ask a question about this.

    Ask a Question