Next Day Delivery is currently unavailable

Epoxy Floor Paint Matt Anti Slip - 5L

Epoxy Floor Paint Matt Anti Slip - 5L

In Stock

A heavy duty epoxy floor paint with an anti slip matt finish, ideal for hiding dents and scratches in concrete floors as well as providing a safe surface to reduce workplace accidents. It’s great for highly trafficked areas where vehicles are used and parked - with the lowest price guaranteed.

Use in warehouses, workshops, showrooms and factories

Takes vehicle traffic without leave hot tyre marks

Use on bare concrete or existing well bonded paint

Stands up to heavy wear and tear

Anti slip aggregate helps reduce the chance of slips

With a two part epoxy paint it’s not practical to apply two coats with just one tin – please refer to the ‘Technical Spec’ tab

Also available:

Useful Information

Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.

  • Here’s how we work it out:
  • Area to be painted: 45m² with two coats (we recommend two coats for the best result)
  • Tins needed: 2 x 5L and 2 x 2.5L
  • Why: Use 1 x 5L and 1 x 2.5L for the first coat; and the same again for the second

Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.

Got It
How it Works
  • Tins

  • Tins


floorsaver's two part epoxy floor paint seals, protects and dust-proofs concrete floors in just two coats. It gives concrete floors in factories, production areas, garages and warehouses a tough, safe and long lasting surface. Not only that, it’s matt finish helps reduce glare to disguise any dents, scratches or marks – giving you the professional result you’re after!

Use floorsaver Epoxy Floor Paint Matt Anti Slip where an ordinary single pack paint won't take the wear and tear of an industrial environment; including forklift truck areas, or areas where vehicles are used and parked. The Anti Slip properties also make it ideal for environments where spills are likely to happen.

It can be applied to bare concrete, sand, wood and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

You might also like:


How to Use

Step 1 - Preparation:

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
  • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
  • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.


Step 2 - Repairs:

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.


Step 3 - Application:

  • Apply at a minimum temperature of 15 ℃.
  • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
  • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
  • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
  • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
  • Use a brush around the edges and a medium pile roller for the floor.
  • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.


EPOXY FLOOR PAINT MATT ANTI-SLIP - If using the anti slip version, please proceed as follows:

Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.

Where to use


  • Are you painting a garage floor? floorsaver Epoxy Floor Paint Matt is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint.
  • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint Matt is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.

    Technical Spec

    Interior/exterior usage Suitable for indoor use only
    • Virtually odourless - can be applied in confined areas
    • Good general chemical resistance
    Minimum application temperature 15℃
    Max operational temperature 60 ℃
    Curing times At 15-20°C:
    • Recoat - 12 hours. The second coat should be applied within 5 days of the first coat.
    • Walk on - 16-24 hours
    • Cars - 2-3 days
    • Full hardness, scratch & chemical resistance - 7 days
    • 5L covers up to 30m² per coat
    • 2.5L covers up to 15m² per coat
    Coats required 2. Floorsaver Epoxy Floor Paint Matt is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know.
    Epoxy Floor Paint Matt Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
    Usable working time (at 15 ℃) 2 hours at
    Shelf Life 12 months, if unopened, and should not be allowed to freeze


    We don't recommend:

    • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
    • Applying to self-levelling floor screeds.
    • Applying to hard, very smooth power floated concrete where paint can‚¬„¢t sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
    • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint Matt to perform.
    • Applying to metal since it can cause rusting.


    Product Information Sheet


    Resin Safety Sheet


    Curing Agent Safety Sheet



    Have a Question?

    Be the first to ask a question about this.

    Ask a Question