Epoxy Floor Paint - 5L

SKU: FS-00023

Regular price £70.05 INC VAT
Regular price £58.38 EXC VAT
Sale price
£70.05 INC VAT
£58.38 EXC VAT

In stock

An industrial grade, heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors & areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean.

Product Features:

  • Use in warehouses, workshops, showrooms and factories with heavy wear and tear
  • Top choice for garage floors as it won't mark from hot tyres
  • Use on bare concrete or existing well bonded paint
  • Water based formulation, virtually solvent free
  • Easy to clean
Select Colour
Select Size
Bulk Savings With Pallets

Need a large quantity? Buy in pallets to activate bulk savings.

Epoxy Floor Paint - 5L

What you get:

4L Coloured Curing Agent in a 5L tin
1L Clear Resin
(These are mixed together to make 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 5L is equivalent to 6. 6kg

18783453642821

45623539171606

45640256782614

45640256848150

Epoxy Floor Paint - 2.5L

What you get:

2L Coloured Curing Agent in a 2. 5L tin
0. 5L Clear Resin in a 1L tin
(These are mixed together to make 2. 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paintgives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 2. 5L is equivalent to 3. 3kg

18783471173701

18783471206469

45640254652694

Epoxy Floor Paint Anti Slip - 5L Epoxy Floor Paint Anti Slip - 2.5L

Useful Information

Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.

  • Here’s how we work it out:
  • Area to be painted: 45m² with two coats (we recommend two coats for the best result)
  • Tins needed: 2 x 5L and 2 x 2.5L
  • Why: Use 1 x 5L and 1 x 2.5L for the first coat; and the same again for the second

Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.

Got It
How it Works
Calculate
  • Tins

  • Tins

FREE Standard Delivery*
Free standard delivery on your order when you spend over £100

FREE Standard Delivery*

Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)

Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.

*Delivery exclusions

We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.

Collapsible content

  • What you get:

    4L Coloured Curing Agent in a 5L tin
    1L Clear Resin
    (These are mixed together to make 5L of paint)

    Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

    Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

    The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

    It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

    For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

    NB: 5L is equivalent to 6. 6kg

  • Preparation

    • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
    • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly "Sand" glossy paint to dull down the shine and roughen it up.
    • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

    Repairs

    • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

    Application

    • Apply at a minimum temperature of 15°C
    • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
    • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
    • Give a good stir with something wide, like a "Wood"en batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
    • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
    • Use a brush around the edges and a medium pile roller for the floor.
    • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

    Where to use

    • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint.
    • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.
  • Specification Value
    Product usage
    • Interior
    Product shelf life 12 months, if unopened and should not be allowed to freeze.
    Maximum operational temperature 60°C
    Product drying time At 15°C-20°C: Recoat - 12 hours. The second coat should be applied within 5 days of the first coat. Walk on - 16-24 hours. Cars - 2-3 days. Full hardness, scratch & chemical resistance - 7 days
    Product coats 2
    Product coverage 5L / 6.6kg covers up to 30m² per coat. 2.5L / 3.3kg covers up to 15m² per coat
    Product properties Virtually odourless - can be applied in confined areasGood general chemical resistance
    We do not recommend
    • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
    • Applying to self-levelling floor "Screed"s, without checking compatibility with the "Screed" manufacturer.
    • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
    • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
    • Applying to "Metal" since it can cause rusting.
  • Product Information Sheet

    Download

    Safety Data Sheet - Resin

    Download

    Safety Data Sheet - Curing Agent

    Download

Collapsible content

Description

What you get:

4L Coloured Curing Agent in a 5L tin
1L Clear Resin
(These are mixed together to make 5L of paint)

Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean finish.

Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.

It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

NB: 5L is equivalent to 6. 6kg

How to Use

Preparation

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
  • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly "Sand" glossy paint to dull down the shine and roughen it up.
  • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

Repairs

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

Application

  • Apply at a minimum temperature of 15°C
  • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
  • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
  • Give a good stir with something wide, like a "Wood"en batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
  • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
  • Use a brush around the edges and a medium pile roller for the floor.
  • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

Where to use

  • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint.
  • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic.
Technical Spec
Specification Value
Product usage
  • Interior
Product shelf life 12 months, if unopened and should not be allowed to freeze.
Maximum operational temperature 60°C
Product drying time At 15°C-20°C: Recoat - 12 hours. The second coat should be applied within 5 days of the first coat. Walk on - 16-24 hours. Cars - 2-3 days. Full hardness, scratch & chemical resistance - 7 days
Product coats 2
Product coverage 5L / 6.6kg covers up to 30m² per coat. 2.5L / 3.3kg covers up to 15m² per coat
Product properties Virtually odourless - can be applied in confined areasGood general chemical resistance
We do not recommend
  • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
  • Applying to self-levelling floor "Screed"s, without checking compatibility with the "Screed" manufacturer.
  • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
  • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
  • Applying to "Metal" since it can cause rusting.
Data Sheets

Product Information Sheet

Download

Safety Data Sheet - Resin

Download

Safety Data Sheet - Curing Agent

Download

QUESTIONS & ANSWERS

Ask a Question
  • A: Hi, I am afraid we dont sell the comonents seperately. The resin and coloured curing agent are measured to work together in exact qunatities and we can only supply them together, as a single unit. I am sorry.

  • A: After the 2nd coat has been applied - our Epoxy Floor Paint can be walked on after approx. 16-24 hours. We recommend allowing 2-3 days before regular use such as vehicle movement.

  • A: Hi, we dont recommend this ocating for use externally, as it is not UV resistant. It would be fine to be applied in reasonably warm and dry conditions externally, but if exposed to sunligt it can change colour. This is more common with the pale shades, like light grey. However, if you are simply looking ot get the coating down and then it will be covered soon after by the garage structure it may not be problem.

  • A: Hi, it really depends on the drying time of the concrete you used. There are rapid drying version and others with additives or different mixes which may impact this (if you used a builder to lay it, they may offer some guidance on this). 
    Before painting, we would recommend the concrete has a mositure content of less than 5% (almost completely dry) as a rough rule of thumb, for normal concrete, we use an estimate of 1 day drying for every millimetre in depth. Hope this helps.
    If you simply cannot wait for it to dry fully, you can source paintable epoxy damp proof membrane products to retain the mositure in the slab which can then be painted with our coating, but this would likely increase costs significnatly and please call us to check whether our product can be used in conjunction with any other products before going ahead.

  • A: Hi, I am sorry but i would not recommend applying thisto cermaic tiles. Most tiles are non-porous meaning the paints cannot soak in and bond correctly. Although it may appear to stick well, im afraid it is not usually the case when you need to walk on it etc. Sorry.

  • A: Hi, you can use this over a pre painted surface. We would recommend giving the floor a good clean and snading it back to ensure you remove any loose/flaking paint. This will also ensure that any remaining well bonded paint has a 'key' for our coating to bond to. Then you can paint over with our coatings.

  • A: Hi, our epoxy floor paint is a water based epoxy paint. I am afraid i would not recommend using it in this way. A solvent based product would be more suited to timber to allow for a little flexibility.

  • A: Hi, our epoxy floor paint can be used to over coat previous floor paints provided it is fully cured and well bonded. We would recommend abrading (sanding) the surface you have to ensure any loose material is removed and to get a 'key' to the remaining coating. This would give our product the best texture to bond to the existing coating. Once cleaned and abraded you can simply paint over with our coating.

  • A: Hi,

    I am sorry but we currently only offer our paints in a gloss finish.
     
    Kind Regards,

    Michael

  • A: Hi,

    The Epoxy Floor Paint is mixed in a 4:1 ratio (when buying 5L you would receive 4L of coloured curing agent and 1L of resin)

    We don't usually recommend part mixing, but if you ensure you keep the ratios the same it should work fine.

    Alternatively, we do sell this in 2.5L options.

    Kind Regards,
    Michael

  • A: Hi Bob,

    Thank you for your interest in our product. I do believe the coating would be a good option for a decorative finish. Once fully cured there is unlikely to be any problem with water spilt on the surface, though standing/pooling water could cause the surface to discolour.

    However, any water rising from the surface below could cuase the paint to be pushed from the surface. Although it is a hard wearing epoxy product and it is likely, with a textured surface to achieve a strong bond, the rising water could still be a problem as this causes pressure below the coating.

    I am afraid i would recommend finding a DPM product to apply first. This can be an epoxy damp proof membrane or paintable style coating rather than a traditional DPM system. Provided our water based epoxy coating can be painted on top, this woud still be a very practical solution.

    Kind Regards,
    Michael

  • A: We are often cautious with screeds because of the amount of different screeds and some are not directly trafficable or able to be painted. If the screed does state ok to paint and be directly trafficked and is porous, then the water based Epoxy Floor Paint will be suitable as long as clean, dry and sound.

  • A: The Epoxy Floor Paint is only suitable for internal concrete so this wouldn’t be suitable.

    If the concrete isn’t too patterned then you could use the Car Park Paint https://www.floorsaver.co.uk/collections/exterior-paint/products/car-park-paint?variant=1224564211730 however if the concrete is heavily patterned you would just need to be careful and make sure the paint doesn’t pool where its indented.

  • A: Hi, our Epoxy FLoor Paint is a gloss finish. I am afraid we dont carry other finishes, only the gloss. If you have 37m2 and decided to use our gloss coating, you would need x2 Cleaner & Degreaser and 2 x 5L + 2 x 2.5L of Epoxy Floor Paint

  • A: The Epoxy Floor Paint Anti Slip covers 30m2 per 5L per coat & two coats required.

    Here is a link to the web page - https://www.floorsaver.co.uk/products/epoxy-floor-paint-anti-slip?_pos=6&_sid=c78568e24&_ss=r

  • A: This coating would be suitable, provided the surface would accept a water based paint coating. There is no concern with the under floor heating, though I would leave it off or on a low and constant setting during application and for the first few days. This will allow the product to cure consistently.

    If you are able, it would be best to check with the screed manufacturer to ensure their surface can be painted.

  • A: Hi, this coating is a water based two pack epoxy, although it can be used on bitumen based surfaces, like asphalt, it is only recommended once the asphalt is at least 6 months old. This is to ensure the solvents in the dpm have 'disappeard' from the surface and the product is dry throughout. The coating would normally require a level of texture and small amount of porosity to bond well, which is unlikely in a newly laid DPM.

    I would suggest allowing the DPM to completely cure before abrading the surface to create a key, then applying this system. However, given it is a bitumen based product, it may be a good idea to speak with the manufacturer to ensure they are happy for you to coat their product with a water based epoxy and also for further clarification on timescales involved.

  • A: Hi, when using a primer you may only require one top coat to achieve a cosmetically pleasing finish but only if the surface is not particularly porous. We do however recommend 2 coats to achieve full strength and if the substrate is porous 2 coats will stop it looking patchy.  Do take a look at our data sheet as it covers preparation, application, curing times, etc which you may find helpful.

  • A: The proportions need to be very accurate or else the product may not go off or perform as it should do.  You can part mix by volume, but unless you are spot on you could run into difficulties.  It would be best to purchase 2 x 2.5L to avoid taking that risk.

  • A: We do not recommend our products going over self levelling compounds.  However, some manufacturers say that they can be painted, so it's best to speak to Sika and ask them. They may say that a two part, water based epoxy resin can be used, if this is the case then ours would fit the bill but we couldn't guarantee anything.

    The problem with self levellers is that they are generally used as base for laying carpet, wood, vinyl or tiles over, they are not usually strong enough to traffic directly, therefore if you paint them the leveller would break up taking the paint off with it.  Also, paint doesn't tend to bond that well to self levellers - sorry to be the bearer of bad news!

  • A: Rising damp can be a bit tricky so it's probably best if we have a chat about this over the phone.  When you have a minute please can you call us on 0345 450 9888 and we can take it from there? I hope to hear from you soon.  

  • A: I would suggest purchasing the 2.5L Units as we do not recommend splitting the mix. Epoxy Floor Paint - 2.5L - heavy duty, two pack epoxy floor paint – floorsaver