Concrete Sealer - 5L

Concrete Sealer - 5L

Back in stock soon

Seal, harden and dustproof concrete with the ultimate, multi-purpose concrete sealer - with the lowest price guaranteed!

Perfect for bare concrete, masonry and similar porous materials, use floorsaver Concrete Sealer for a hard wearing, non-dusty floor surface with added colour that won't peel and is easy to clean. 

The lowest price - guaranteed!

Ideal for bare concrete, masonry and similar porous materials

Stands up to stains making cleaning easier

floorsaver Concrete Sealer is really 2 products in 1. It contains a micronised acrylic which penetrates into porous concrete to harden and dustproof, plus a cross-linking acrylic which forms a film on the floor surface. Being so penetrative means that it can't peel off and the surface film shrugs off stains and makes cleaning far easier.

You might also like:


    Step 1 - Preparation:

    • Surfaces should be clean and reasonably dry. It does not matter if some residual damp remains after cleaning, but make sure that the floor is as dry as possible since the product works by absorption into a dry base.
    • Use Floorsaver Cleaner and Degreaser to remove oil and grease.
    • Floorsaver Concrete Sealer is suitable for bare, porous concrete only. If in doubt that your surface is porous, tip a cup of water onto it and see if some soaks in, if so, Floorsaver Concrete Sealer is suitable. If the water beads up on the floor and shows little sign of soaking in, please do not use our product.
    • If the floor is quite clean, a good sweep and vacuum may be enough. Avoid washing very porous surfaces such as sand and cement screed since they will absorb so much water you'll need to wait a day or so for them to dry out.


    Step 2 - Repairs:

    • Fill small surface holes and cracks using Floorsaver Crack & Hole Filler. Use Floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. Floorsaver Mouldable Concrete Filler can be used if you want a curved edge, such as a stair nosing, etc.
    • Just to be aware, you will see the repair through the clear sealer.


    Step 3 - Application:

    • Shake the container for a few seconds. Pour it onto the floor, a small area at a time and distribute evenly using a soft broom, working it well into the surface. If it immediately 'disappears' into a very porous surface, add a little more. Keep the application even and avoid letting the product puddle on the surface. One coat is usually enough, but a second coat may be required on very porous surfaces or to achieve an even finish.
    • Clean applicators in water.


      Content Micronised acrylic sealer
      Appearance Clear, low sheen finish
      Interior/exterior usage Suitable for interior and exterior use
      Surfaces Bare concrete, masonry and similar porous materials
      Drying times
      • Recoat (if required) - 8 hours at 15-20℃
      • Touch dry - 4 hours at 15-20
      • Light traffic - 8 hours at 15-20
      • Full use - 12 hours at 15-20
      • Full scuff resistance - 7 days
      • 5L covers approximately 40m²
      • 25L covers approximately 200m²
      Shelf Life 12 months, if unopened and should not be allowed to freeze


      We don't recommend:

      • Applying Concrete Sealer to a very hard, dense, non-porous surfaces such as power floated floors.
      • Acid etching concrete before using Concrete Sealer.

      Product Information Sheet


      Safety Sheet



      Ask a Question
      • A: This product should be allowed to dry for 5-7 days. Then it can be painted, tiles or almost anything you need to do.

      • A: If the natural sandstone is porous the concrete sealer will be fine, however it will not stop algae from forming on stone / concrete pavers.

      • A: Yes the concrete sealer will be absolutely fine on Brick, the sealer seals and hardens new and old bare, porous substrates. It is micro-porous which allows the surface to breathe. The Concrete Sealer contains a micronised acrylic which penetrates deep into porous surfaces to bind, harden and seal.

      • A: Due to the complexity of this application we would recommend calling our Technical Advisors on 0345 4509888 as we will have a few questions regarding the substrate.

      • A: It's clear, but we do have coatings in our range which will seal and colour the floor at the same time.