Anti Slip Flat Sheet in front of door
Anti Slip Flat Sheet in front of door
Anti Slip Flat Sheet in front of door
Anti Slip Flat Sheet in front of door

GRP Anti Slip Flat Sheet

SKU: FS-00266

Anti Slip Flat Sheet in front of door
Anti Slip Flat Sheet in front of door
Anti Slip Flat Sheet in front of door
Anti Slip Flat Sheet in front of door
£55.55 INC VAT
£46.29 EXC VAT
£55.55 INC VAT
£46.29 EXC VAT

In stock

Versatile anti slip GRP flat sheets for excellent slip resistance in the most extreme conditions. Minimise potential slip hazards with cost-effective, long lasting and easy to install safety sheets for indoor and outdoor use.

Product Features:

  • Suitable for both industrial and commercial use.
  • Suitable for interior or exterior environments.
  • Perfect for walkways, gangways, disabled access ramps, factory floors, bridges, landing areas and train platforms.
Select Colour
Select Size
FREE Standard Delivery*
Free standard delivery on your order when you spend over £100

FREE Standard Delivery*

Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)

Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.

*Delivery exclusions

We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.

More info

  • Best used to made slippery walkways and ramps safe
    General purpose, tough GRP suitable for both industrial and commercial use

  • Preparation

    Ensure that the areas fitted are clean, dry and free from loose and friable material. Any 'dished' or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.

    Dry fit all panels to ensure they fit freely and that they sit flat down on the surface. If required, the GRP sheet can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

    Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.

    How to Install

    You can install our  Standard Flat Sheets easily and quickly with a power drill.

    Application

    Apply an approx. 6mm bead (this may need to be increased dependant upon on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the panels approx. 25mm in from the edges. Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a 'peak and a trough', repeat this until you reach the end. Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions. Secure with mechanical fixings, as below.

    Drill holes 15mm in from all edges at no more than 300mm apart from the centres. Depending on the width of the panels it may be necessary to provide fixing points at 600mm centres down the middle of the panels. As substrates vary considerably, additional fixings may be required to fix the panels down. If fixing down two pieces of flat sheet that is constrained by sides (i.e. a ramp with wall on either side) a 5mm expansion gap should be considered between the two or more sheets. This gap can be filled with a standard high modulus mastic.

Description

Best used to made slippery walkways and ramps safe
General purpose, tough GRP suitable for both industrial and commercial use

How to Use

Preparation

Ensure that the areas fitted are clean, dry and free from loose and friable material. Any 'dished' or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.

Dry fit all panels to ensure they fit freely and that they sit flat down on the surface. If required, the GRP sheet can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.

Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.

How to Install

You can install our  Standard Flat Sheets easily and quickly with a power drill.

Application

Apply an approx. 6mm bead (this may need to be increased dependant upon on the substrate conditions) of the high strength gap filling adhesive around the periphery of the underside of the panels approx. 25mm in from the edges. Then, starting from the bottom left corner come up at an angle (approx. 200mm across) and then down at an angle, to create a 'peak and a trough', repeat this until you reach the end. Immediately press the panel firmly to the substrate to ensure adequate transfer of adhesive (depending on the size of the bead, this will elevate the sheet by approximately 1-1.5mm). A firm bond will be achieved in about one hour under normal circumstances and conditions. Secure with mechanical fixings, as below.

Drill holes 15mm in from all edges at no more than 300mm apart from the centres. Depending on the width of the panels it may be necessary to provide fixing points at 600mm centres down the middle of the panels. As substrates vary considerably, additional fixings may be required to fix the panels down. If fixing down two pieces of flat sheet that is constrained by sides (i.e. a ramp with wall on either side) a 5mm expansion gap should be considered between the two or more sheets. This gap can be filled with a standard high modulus mastic.

Technical Spec
Data Sheets

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question