Glow In The Dark Stripe Safety Grip Anti Slip Cleat from Floorsaver
Glow In The Dark Stripe Safety Grip Anti Slip Cleat from Floorsaver

Glow In The Dark Safety Grip - Anti Slip Stair Tread Cleat - 150mm x 610mm

SKU: FS-00285

Glow In The Dark Stripe Safety Grip Anti Slip Cleat from Floorsaver
Glow In The Dark Stripe Safety Grip Anti Slip Cleat from Floorsaver
£9.25 INC VAT
£7.71 EXC VAT
£9.25 INC VAT
£7.71 EXC VAT

In stock

A glow in the dark anti slip cleat for a clear, guiding step to safety. This glow in the dark tape has been manufactured using the latest technology in photo-luminescence to ensure stairways are illuminated well enough in order to be guided to safety. It has been designed to mark exit paths to aid in evacuation of buildings in the event of power failure, and to illuminate hazardous areas in low-level lighting conditions.

Product Features:

  • Non-toxic and free from any phosphorous or radioactive material
  • Anti slip
  • Photo-luminescent tape takes very little time to charge by absorbing artificial or natural light
  • Resin-bonded grit with a glow in the dark pigment bonded to a pressure-sensitive PVC backing
FREE Standard Delivery*
Free standard delivery on your order when you spend over £100

FREE Standard Delivery*

Order from floorsaver and get free standard delivery on your order when you spend over £100. (For smaller orders, a carriage charge does apply.)

Choose standard delivery and we'll get your order to you within 2-3 working days*. Our warehouse is closed at the weekend, so orders placed on a Saturday or Sunday will be processed on the following Monday.

*Delivery exclusions

We only deliver to the UK mainland, excluding the Scottish Highlands. That means we're unable to deliver to Northern Ireland, Ireland, Isles of Scilly, Isle of Wight or the Channel Islands. We are also unable to provide next day delivery to Scotland.

More info

  • A glow in the dark anti slip cleat for a clear, guiding step to safety. This glow in the dark tape has been manufactured using the latest technology in photo-luminescence to ensure stairways are illuminated well enough in order to be guided to safety. It has been designed to mark exit paths to aid in evacuation of buildings in the event of power failure, and to illuminate hazardous areas in low-level lighting conditions.

  • Preparation

    Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.

    Priming
    Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.

    Application

    If appearance is critical we recommend the application of a small trial area first.

    Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.


    Adhesion
    Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

  • Specification Value
    Product usage
    • Interior
    • Exterior
    Product properties Tape glows for up to one hour after charging, ideal for fire exit routes or around hazards
    Product appearance Glow in the dark green
    Size Width: 610mm, Depth: 150mm
    Surfaces Concrete, wood, metal, painted or varnished surfaces
Description

A glow in the dark anti slip cleat for a clear, guiding step to safety. This glow in the dark tape has been manufactured using the latest technology in photo-luminescence to ensure stairways are illuminated well enough in order to be guided to safety. It has been designed to mark exit paths to aid in evacuation of buildings in the event of power failure, and to illuminate hazardous areas in low-level lighting conditions.

How to Use

Preparation

Apply to clean, smooth, dry surfaces such as painted or varnished wood, concrete, metal, tiles, and Terrazzo. Apply direct to smooth, hard concrete; dusty concrete will require a primer.

Priming
Smooth, non porous, dust free surfaces do not require priming. To improve adhesion on weak, dusty surfaces, apply a coat of Safety Tape Primer.

Application

If appearance is critical we recommend the application of a small trial area first.

Avoid application at temperatures below 10℃. Low temperatures can reduce adhesion. On steps and nosings, apply the product approximately 10mm in from the edge to prevent premature wear and edge curl. Peel back the backing strip approximately 50mm to reveal the adhesive layer. Avoid removing too much of the backing strip, but slowly keep peeling it back whilst firming the product into place. Firming down by hand or foot pressure is generally sufficient.


Adhesion
Although the product can be walked on virtually straight away, the adhesive can take 24 hours to set fully. Immediately after placing the item onto the substrate, it can be peeled off reasonably easily. Please allow the adhesive to set if using in heavily trafficked or hazardous areas.

Technical Spec
Specification Value
Product usage
  • Interior
  • Exterior
Product properties Tape glows for up to one hour after charging, ideal for fire exit routes or around hazards
Product appearance Glow in the dark green
Size Width: 610mm, Depth: 150mm
Surfaces Concrete, wood, metal, painted or varnished surfaces
Data Sheets

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question