SlipGrip Screw Down Anti-Slip Aluminium Plates - 115mm x 635mm
In Stock
Stocktake notice: Our warehouse will be closed from 24th - 28th April for our annual stocktake. Orders may still be placed, but will not be despatched during this time. We apologise for any inconvenience caused by this temporary closure.
0
xPreparation
Ensure that the areas to have SlipGrip fitted are clean, dry and free from loose and friable material. Any 'dished'or damaged surface areas should be patch repaired to provide a reasonably flat and consistent surface.
Dry fit all SlipGrip panels to ensure they fit freely and that they sit flat down on the surface. If required, SlipGrip can be trimmed on site to suit, ideally using a skill saw with a 4mm diamond blade or an angle grinder with a 1mm blade.
Please ensure that goggles and gloves are worn at all times when any form of cutting is involved.
Application
We pre-drill screw holes, so fixing them in place is a breeze.
As they are water resistant, you can use them anywhere. However, using SlipGrip Anti Slip Tape Edge Sealer will stop water getting under the treads. If the step is damp then we recommend our SlipGrip Anti Slip Tape Primer too.
Surface | Can be attached to any type of step; concrete, wood, stone, steel (indoors or outdoors) |
Size | Width: 635mm, Depth: 115mm |
A: Hi, unfortunately we only have this item available in this finish, sorry about that :(
"Dear floorsaver or should I say Job Saver! I would truly recommend your paint and fantastic service to go beyond the norm!"
Trusted Customer, Floor Paint – 5L
★★★★★