Floor Paint Anti Slip - 5L
In Stock
Stocktake notice: Our warehouse will be closed from 24th - 28th April for our annual stocktake. Orders may still be placed, but will not be despatched during this time. We apologise for any inconvenience caused by this temporary closure.
0
xfloorsaver Floor Paint dustproofs, seals and protects internal concrete floors. Two coats provide a glossy, easily cleaned finish. It can be applied to bare concrete or existing well bonded paint. When recoating existing floor paint of a similar colour, one coat is generally all that is needed.
You might also like:
Please note - orders for the Yellow colour of our Floor Paint will be labelled as Hazard Paint.
Step 1 - Preparation:
Step 2 - Repairs:
Step 3 - Application:
Interior/exterior usage | For interior use only |
Uses | Suitable for bare concrete or existing well bonded paint, wood and most metal |
Properties | Resists spills of oils and grease |
Coats | 2 coats usually required, although 1 coat may be enough if painting over an existing floor paint of a similar colour |
Coverage |
|
Drying times |
At 15-20 ℃:
|
Minimum application temperature | 15 ℃ |
Applications | Tough enough for use in warehouses, workshops and for general industrial use |
Floor Paint Anti Slip | Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L |
Shelf life | Shelf Life - 3 years, if unopened. Do not allow to freeze. |
We don't recommend:
A: Hi, I am sorry but we only carry this coating in a gloss finish. It would not be suitable for external use as it is not UV resistant. Sorry.
A: Hi Pam, our Floor Paint and Epoxy Floor Paint products are not UV resistant. This means they could possibly change colour under epoxsure to sunlight and this is why we dont recommend them for outside use. If the concrete base will have a cover over it, fairly shortly after being painted, this would be fine (in current weather conidtions, but not in winter). But if it will be left uncovered and epoxsed to sunlight, im afraid it may not be suitable.
Hope this helps, but give us a call if we can hep with anything further.
A: Hi, I am afraid it isn't. It is suitable for heavy foot traffic and pallets but not vehicles. However, our epoxy floor paint anti slip would be suitable for vehicles.
Kind Regards,
Floorsaver
A: hi, thank you for your enquiry, i don't see why not - we would recommend thoroughly abrading any existing paint to recreate a key and then ensure the floor is clean and dry prior to applying a new coating.
if i can help further please let me know.
regards
Mark
A: The anti-slip Floor paint would be touch dry after approx 10 hours and lght traffic usage around 24 hours.
A: Unfortunately we don’t recommend painting patio surfaces as our paints will not have the adhesion.
A: This coating is only really for indoors as it will fade with UV exposure.
We do not have a solid paint for wooden decking.
A: Thank you for your enquiry we supply this product in a light grey and a mid grey but not dark.
A: Sorry, we only carry mid and light grey.
A: Unfortunately this product is not suitable for external use as it is not UV resistant. I am sorry.
Though to answer to your question regarding slip resistance, any coating labelled anti slip would have an aggregated finish to it. This creates a texture like a coarse sandpaper and helps with safety in wet conditions by allowing the water to sit between the peaks and giving better traction under foot. However, should the level of water exceed the size of the peaks/ridges it would not be effective. Therefore it is important to ensure the area does have some kind of run-off to allow the water to run away and not pool excessively on the coating.
"Dear floorsaver or should I say Job Saver! I would truly recommend your paint and fantastic service to go beyond the norm!"
Trusted Customer, Floor Paint – 5L
★★★★★