Glow In The Dark Safety Grip - Anti Slip Photoluminescent Safety Tape

Glow In The Dark Safety Grip Anti Slip Photoluminescent Safety Tape from Floorsaver

Glow In The Dark Safety Grip - Anti Slip Photoluminescent Safety Tape

In Stock

An anti slip glow in the dark floor tape, which provides safety illumination in power-outages and marks exit paths and hazardous areas in low light situations. This glow in the dark tape has been manufactured using the latest technology in photo-luminescence to ensure walkways, stairways and entrances are illuminated well enough in order to be guided to safety. 

Non-toxic and free from any phosphorous or radioactive material

Photoluminescent tape takes very little time to charge by absorbing artificial or natural light

Resin-bonded grit with a glow in the dark pigment bonded to a pressure-sensitive PVC backing

Quantity:

How to Use

Service temperatures -22°F to 160°F, but must be first applied over 50°F

Technical Spec
Appearance Glow in the dark green
Primer required Safety tape edge sealer or safety tape primer
Interior/exterior usage Suitable for interior or exterior surfaces
Uses Concrete, wood, metal, painted or varnished surfaces
Properties Tape glows for up to one hour after charging, ideal for fire exit routes or around hazards
Surfaces Floors, ramps and steps

QUESTIONS & ANSWERS

Ask a Question

  • A: The tapes can be used outside and on to a metal surface but would not give a permanent solution. To give better resistance against rain and other outside weather elements I would advise applying the edge sealer to prevent water ingress.

  • A: I am sorry, but we don't recommend painting over vinyl as paint needs to penetrate and vinyl is non-porous.  However, vinyl is a perfect base for the tape to bond to as it's so smooth.

  • A: Hi, the tape is anti slip, so by nature of having an anti slip finish it is going to be more difficult to keep clean than having a smooth finish - unfortunately that is unavoidable. A stiff broom and detergent should be all that's needed.