Floor Paint - 2.5L

Floor Paint - 2.5L

In Stock

The best value concrete Floor Paint money can buy - with the lowest price guaranteed. Great for improving the look of worn out interior floors, floorsaver concrete Floor Paint is easy to use, hard-wearing and will give you a floor that looks great, is easy to clean and will last for years.

The lowest price - guaranteed!

Great for warehouses, factories, workshops and heavy foot traffic.

Use it on most surfaces - concrete, wood, stone and cement

Stands up to oil and grease

Calculate

Tins

floorsaver concrete Floor Paint dustproofs, seals and protects internal concrete floors. Two coats provide a glossy, easily cleaned finish. It can be applied to bare concrete or existing well bonded paint. If you're re-coating over an existing paint of a similar colour, one coat should do the job. 

You might also like: 

 

Please note - orders for the Yellow colour of our Floor Paint will be labelled as Hazard Paint. 

Interior/exterior usage For interior use only
Uses Suitable for bare concrete or existing well bonded paint, wood and most metal
Properties Resists spills of oils and grease
Coats 2 coats usually required, although 1 coat may be enough if painting over an existing floor paint of a similar colour
Coverage
  • 5L covers up to 40m² per coat
  • 2.5L covers up to 20m² per coat
Drying times

At 15-20 ℃:

  • Recoat - 16 hours (if there is a time lapse between coats, the second coat must be applied within 5 days of the first coat)
  • Touch Dry - 10 hours
  • Light Foot Traffic - 24 hours
  • Full Use - 36 hours. Please check that the paint has fully cured before putting into full use
Minimum application temperature 15 ℃
Applications Tough enough for use in warehouses, workshops and for general industrial use
Shelf life Shelf Life - 3 years, if unopened. Do not allow to freeze.

 

We don't recommend:

  • Using this product in areas where cars are parked - instead use floorsaver Epoxy Floor Paint.
  • Using outside.
  • Applying to self-levelling floor screeds.
  • Applying to concrete contaminated with oil, grease, fats or wax.
  • Applying to hard, smooth, very dense or power floated concrete where the paint can't soak into the surface. If in doubt tip a cup of water onto the floor and see if it disappears.

Product Information Sheet

Download

Safety Sheet

Download

Step 1 - Preparation:

  • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface. On greasy or previously painted floors clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity.

 

Step 2 - Repairs:

  • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Concrete Filler can be used if you want a curved edge, such as a stair nosing, etc.

 

Step 3 - Application:

  • Check the floor is dry before painting and that the temperature is a minimum of 15 ℃.
  • Stir the paint thoroughly.
  • Do not thin.
  • Tip into a roller tray.
  • Cut in around edges with a brush.
  • Apply to the floor area using a paint roller, working well into the surface. Bare concrete should be sufficiently porous to allow the first coat to sink in.
  • Clean equipment with White Spirit.

QUESTIONS & ANSWERS

Ask a Question
  • A: Our Floor Paint is a 2 coat product (so no under coat needed) suitable for concrete surfaces. For bare concrete - we recommend that the concrete is clean, dry and dust free prior to application. For a previously painted floor - the surface would need to be abraded to re-create a key for the paint to adhere. No primer is generally required.

  • A: Hi, provided it is covered and not exposed to UV, there is not problem using this externally. If uncovered, i am afraid we would not recommend using it im afraid, as the paint is not UV resistant.

  • A: Hi, this would be fine to be painted wiht our Floor Paint. Though I would always suggest sanding back the surface you want to paint to give our coating the best chance of adhering to the surface.

  • A: Hi, I am sorry but we cannot guarantee its UV resistance and only recommend it for internal use.

  • A: im sorry, i would not recommend painting tiles with our floor paint. the tiles would not allow the coating to stick to it well enough to be walked over.

  • A:

    Hi,

     

    Thank you for your enquiry,

     

    Unfortunately we do not have anything suitable for tiled surfaces due to adhesion.

     

    If I can help further please let me know.

     

    Regards

     

    Mark

  • A: Hi, I am afraid I would not recommend painting this type of surface. The tiles are designed to not allow things to stick to them and our paint cannot penetrate the surface to form a good bond. I'm afraid it is unlikely to form a strong enough bond to the surface of the tile.
    Kind Regards,
    Floorsaver

  • A: Hi, the only sealer we have is our Concrete Dustproofer, this will soak into the concrete and will harden and dustproof a weak substrate - https://www.floorsaver.co.uk/collections/sealers, however this will not leave a visible finish.

  • A: Our most suitable product for exterior concrete steps would be our Car Park Paint. This will cover approximately14-18m² per 5L with one thick coat. We do also have an exterior Line Marking Paint available. Please view the product page for further information.