Epoxy Floor Paint Anti Slip - 2.5L

Epoxy Floor Paint Anti Slip - 2.5L

In Stock

An industrial grade, slip resistant heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean  - with the lowest price guaranteed.

 

watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

 

Ideal for preventing slips and trips in industrial environments, floorsaver anti slip epoxy floor paint will give your floor a tough, low maintenance and long lasting finish that will last for years before needing another coating. 

The lowest price - guaranteed!

Use in warehouses, workshops, showrooms and factories with heavy wear and tear

Top choice for garage floors as it won't mark from hot tyres

Use on bare concrete or existing well bonded paint

Water based formulation, virtually solvent free and easy to clean


Also available:

Epoxy Floor Paint - 5L Epoxy Floor Paint - 2.5L Epoxy Floor Paint Anti Slip - 5L

Ideal for preventing slips and trips in industrial environments, floorsaver anti slip epoxy floor paint will give your floor a tough, low maintenance and long lasting finish that will last for years before needing another coating. It's great for highly trafficked interior concrete floors and areas where vehicles are used and parked.

Use in warehouses, workshops, showrooms and factories with heavy wear and tear

Top choice for garage floors as it won't mark from hot tyres 

Use on bare concrete or existing well bonded paint

Water based formulation, virtually solvent free and easy to clean

 Watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

 

 

Also available:

    Description

    4L Coloured Curing Agent in a 5L tin
    1L Clear Resin
    x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
    (These are mixed together to make 5L of paint)

    Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish. 

    Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

    The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

    It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

    For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

    NB: 5L is equivalent to 6.6kg

    You might also like: 

     

    How to Use

    Step 1 - Preparation:

    • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
    • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
    • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

     

    Step 2 - Repairs:

    • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

     

    Step 3 - Application:

    • Apply at a minimum temperature of 15 ℃.
    • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
    • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
    • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
    • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
    • Use a brush around the edges and a medium pile roller for the floor.
    • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

     

    EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:

    Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.

     

  • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint. 
  • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic. 
  •  

    Technical Spec
    Interior/exterior usage Suitable for indoor use only
    Properties
    • Virtually odourless - can be applied in confined areas
    • Good general chemical resistance
    Minimum application temperature 15
    Max operational temperature 60 ℃
    Curing times At 15-20°C:
    • Recoat - 12 hours.  The second coat should be applied within 5 days of the first coat.
    • Walk on - 16-24 hours
    • Cars - 2-3 days
    • Full hardness, scratch & chemical resistance - 7 days
    Coverage
    • 5L / 6.6kg covers up to 30m² per coat
    • 2.5L / 3.3kg covers up to 15m² per coat
    Coats required 2. Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 5L tin can’t be used for 2 coats. It will cover 30m² with one coat, but if you have for example, 15m², you can’t use half the 5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin. This is why we also make a 2.5L size. This covers 15m² with one coat, so select two of these if you want to apply 2 coats to an area of up to 15m².

    You can combine 5L (30m²) and 2.5L (15m²) for areas which are not multiples of 30m² in size and more than one coat is required. For example, to cover 45m² with 2 coats use 1 x 5L and 1 x 2.5L for the first coat and same again for the second. If you have any questions please let us know.

    Epoxy Floor Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
    Usable working time (at 15 ℃) 2 hours at
    Shelf Life 12 months, if unopened, and should not be allowed to freeze

     

    We don't recommend:

    • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
    • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
    • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
    • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
    • Applying to metal since it can cause rusting.
    Data Sheets

    Product Information Sheet

    Download

    Resin Safety Sheet

    Download

    Curing Agent Safety Sheet

    Download

    Anti Slip Aggregate Safety Sheet

    Download

    18783453806661

    18783453839429

    18783453872197

    45640304001302

    45640304034070

    45640304066838

    45640304099606

    45640304132374

    Epoxy Floor Paint Anti Slip - 2.5L

    An industrial grade, slip resistant heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean  - with the lowest price guaranteed.

     

    watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

     

    Ideal for preventing slips and trips in industrial environments, floorsaver anti slip epoxy floor paint will give your floor a tough, low maintenance and long lasting finish that will last for years before needing another coating. 

    The lowest price - guaranteed!

    Use in warehouses, workshops, showrooms and factories with heavy wear and tear

    Top choice for garage floors as it won't mark from hot tyres

    Use on bare concrete or existing well bonded paint

    Water based formulation, virtually solvent free and easy to clean


    Also available:

    Description

    What you get:

    2L Coloured Curing Agent in a 2.5L tin
    0.5L  Clear Resin in a 1L tin
    x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
    (These are mixed together to make 2.5L of paint)

    Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish. 

    Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

    The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

    It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

    For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

    NB: 2.5L is equivalent to 3.3kg

      You might also like: 

       

      How to Use

      Step 1 - Preparation:

      • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
      • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
      • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

       

      Step 2 - Repairs:

      • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

       

      Step 3 - Application:

      • Apply at a minimum temperature of 15 ℃.
      • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
      • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
      • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
      • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
      • Use a brush around the edges and a medium pile roller for the floor.
      • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

       

      EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:

      Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.

       

    • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint. 
    • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic. 
    •  

      Technical Spec
      Interior/exterior usage Suitable for indoor use only
      Properties
      • Virtually odourless - can be applied in confined areas
      • Good general chemical resistance
      Minimum application temperature 15
      Max operational temperature 60 ℃
      Curing times At 15-20°C:
      • Recoat - 12 hours.  The second coat should be applied within 5 days of the first coat.
      • Walk on - 16-24 hours
      • Cars - 2-3 days
      • Full hardness, scratch & chemical resistance - 7 days
      Coverage
      • 5L / 6.6kg covers up to 30m² per coat
      • 2.5L / 3.3kg covers up to 15m² per coat
      Coats required 2. Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know.
      Epoxy Floor Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
      Usable working time (at 15 ℃) 2 hours at
      Shelf Life 12 months, if unopened, and should not be allowed to freeze

       

      We don't recommend:

      • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
      • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
      • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
      • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
      • Applying to metal since it can cause rusting.
      Data Sheets

      Product Information Sheet

      Download

      Resin Safety Sheet

      Download

      Curing Agent Safety Sheet

      Download

      Anti Slip Aggregate Safety Sheet

      Download

      18783453970501

      18783454003269

      Useful Information

      Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

      If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.

      • Here’s how we work it out:
      • Area to be painted: 45m² with two coats (we recommend two coats for the best result)
      • Tins needed: 2 x 5L and 2 x 2.5L
      • Why: Use 1 x 5L and 1 x 2.5L for the first coat; and the same again for the second

      Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.

      Got It
      How it Works
      Calculate
      • Tins

      • Tins

      What you get:

      2L Coloured Curing Agent in a 2.5L tin
      0.5L  Clear Resin in a 1L tin
      x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
      (These are mixed together to make 2.5L of paint)

      Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish. 

      Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

      The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

      It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

      For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

      NB: 2.5L is equivalent to 3.3kg

        You might also like: 

         

        Step 1 - Preparation:

        • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
        • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
        • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

         

        Step 2 - Repairs:

        • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

         

        Step 3 - Application:

        • Apply at a minimum temperature of 15 ℃.
        • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
        • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
        • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
        • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
        • Use a brush around the edges and a medium pile roller for the floor.
        • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

         

        EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:

        Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.

         

      • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint. 
      • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic. 
      •  

        Interior/exterior usage Suitable for indoor use only
        Properties
        • Virtually odourless - can be applied in confined areas
        • Good general chemical resistance
        Minimum application temperature 15
        Max operational temperature 60 ℃
        Curing times At 15-20°C:
        • Recoat - 12 hours.  The second coat should be applied within 5 days of the first coat.
        • Walk on - 16-24 hours
        • Cars - 2-3 days
        • Full hardness, scratch & chemical resistance - 7 days
        Coverage
        • 5L / 6.6kg covers up to 30m² per coat
        • 2.5L / 3.3kg covers up to 15m² per coat
        Coats required 2. Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know.
        Epoxy Floor Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
        Usable working time (at 15 ℃) 2 hours at
        Shelf Life 12 months, if unopened, and should not be allowed to freeze

         

        We don't recommend:

        • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
        • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
        • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
        • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
        • Applying to metal since it can cause rusting.

        Product Information Sheet

        Download

        Resin Safety Sheet

        Download

        Curing Agent Safety Sheet

        Download

        Anti Slip Aggregate Safety Sheet

        Download

        QUESTIONS & ANSWERS

        Ask a Question
        • A: Yes, we would recmmend keeping the heating on a low constant temperature when applying the paint and for the first 5 days to allow it to set consistently across the floor.

        • A: Hi, I am sorry but the product is not suitable for external applications. It is not UV resistant im afraid.

        • A: Hi,  Thankyou for your enquiry,  Unfortunately we do not have anything suitble for wet room environments. All our products are for porous surfaces such as concrete and asphalt.

          if I can help further please let me know.

          Regards

          Mark

        • A: Hi,

          To cover a 25m2 area with our Epoxy Floor Paint Anti-Slip, we would recommend buying 2 x 5L. 

          this would be enough to cover the area with two coats, one 5L for each coat, as recommended.

          Using the 2.5L version, you would need 4 units, so the 5L version would be more cost effective in this instance. 

          Kind Regards,

          Michael

        • A: The Epoxy Floor paint does require a minimum floor temperature of 10 degrees due to being a water based coating. Please note the air temperature is normally 5 degrees warmer than the floor.

        • A: Epoxy Floor Paint is a water based epoxy resin, and the water content will raise the grain on Plywood making the wood quite rough.  However, you can sand this back down to leave a smooth finish.  If you don't want to do this then use our Floor Paint insteaed (comes in an anti slip version too).  This is a single pack, polyurethane and it will not raise the grain.  It is a tough coating but not as much as the Epoxy Floor Paint.

        • A: Yes it can be used on walls providing you apply 2 thin coats.  If it's applied too thickly it could 'curtain' (ripple).