Epoxy Floor Paint Anti Slip - 5L

Epoxy Floor Paint Anti Slip - 5L

In Stock

An industrial grade, slip resistant heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean  - with the low prices guaranteed.

10% off. Use code JUNEAS 

Watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

 

Ideal for preventing slips and trips in industrial environments, floorsaver anti slip epoxy floor paint will give your floor a tough, low maintenance and long lasting finish that will last for years before needing another coating. 

Lowest prices - guaranteed!

Use in warehouses, workshops, showrooms and factories with heavy wear and tear

Top choice for garage floors as it won't mark from hot tyres

Use on bare concrete or existing well bonded paint

Water based formulation, virtually solvent free and easy to clean

With a two part epoxy paint it’s not practical to apply two coats with just one tin – please refer to the ‘Technical Spec’ tab

 

Also available:

    Quantity:

    Epoxy Floor Paint - 5L Epoxy Floor Paint - 2.5L Epoxy Floor Paint Anti Slip - 5L

    An industrial grade, slip resistant heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean  - with the low prices guaranteed.

    10% off. Use code JUNEAS 

    Watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

     

    Ideal for preventing slips and trips in industrial environments, floorsaver anti slip epoxy floor paint will give your floor a tough, low maintenance and long lasting finish that will last for years before needing another coating. 

    Lowest prices - guaranteed!

    Use in warehouses, workshops, showrooms and factories with heavy wear and tear

    Top choice for garage floors as it won't mark from hot tyres

    Use on bare concrete or existing well bonded paint

    Water based formulation, virtually solvent free and easy to clean

    With a two part epoxy paint it’s not practical to apply two coats with just one tin – please refer to the ‘Technical Spec’ tab

     

    Also available:

      Description

      4L Coloured Curing Agent in a 5L tin
      1L Clear Resin
      x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
      (These are mixed together to make 5L of paint)

      Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish. 

      Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

      The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

      It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

      For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

      NB: 5L is equivalent to 6.6kg

      You might also like: 

       

      How to Use

      Step 1 - Preparation:

      • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
      • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
      • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

       

      Step 2 - Repairs:

      • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

       

      Step 3 - Application:

      • Apply at a minimum temperature of 15 ℃.
      • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
      • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
      • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
      • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
      • Use a brush around the edges and a medium pile roller for the floor.
      • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

       

      EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:

      Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.

       

    • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint. 
    • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic. 
    •  

      Technical Spec
      Interior/exterior usage Suitable for indoor use only
      Properties
      • Virtually odourless - can be applied in confined areas
      • Good general chemical resistance
      Minimum application temperature 15
      Max operational temperature 60 ℃
      Curing times At 15-20°C:
      • Recoat - 12 hours.  The second coat should be applied within 5 days of the first coat.
      • Walk on - 16-24 hours
      • Cars - 2-3 days
      • Full hardness, scratch & chemical resistance - 7 days
      Coverage
      • 5L / 6.6kg covers up to 30m² per coat
      • 2.5L / 3.3kg covers up to 15m² per coat
      Coats required 2. Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 5L tin can’t be used for 2 coats. It will cover 30m² with one coat, but if you have for example, 15m², you can’t use half the 5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin. This is why we also make a 2.5L size. This covers 15m² with one coat, so select two of these if you want to apply 2 coats to an area of up to 15m².

      You can combine 5L (30m²) and 2.5L (15m²) for areas which are not multiples of 30m² in size and more than one coat is required. For example, to cover 45m² with 2 coats use 1 x 5L and 1 x 2.5L for the first coat and same again for the second. If you have any questions please let us know.

      Epoxy Floor Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
      Usable working time (at 15 ℃) 2 hours at
      Shelf Life 12 months, if unopened, and should not be allowed to freeze

       

      We don't recommend:

      • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
      • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
      • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
      • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
      • Applying to metal since it can cause rusting.
      Data Sheets

      Product Information Sheet

      Download

      Resin Safety Sheet

      Download

      Curing Agent Safety Sheet

      Download

      Anti Slip Aggregate Safety Sheet

      Download

      18783453806661

      18783453839429

      18783453872197

      18783453904965

      18783453937733

      18791541637189

      18791545208901

      18791548846149

      18791552581701

      Epoxy Floor Paint Anti Slip - 2.5L

      10% off. Use code JUNEASAn industrial grade, slip resistant heavy duty epoxy floor paint that stands up to heavy wear and tear. Great for highly trafficked interior concrete floors and areas where vehicles are used and parked. As a water based epoxy coating, it is more hygienic to use and makes surfaces easier to clean  - with the lowest price guaranteed.

       

      watch our how to mix and apply video here: https://youtu.be/en6sWwggT8k

       

      Ideal for preventing slips and trips in industrial environments, floorsaver anti slip epoxy floor paint will give your floor a tough, low maintenance and long lasting finish that will last for years before needing another coating. 

      The lowest price - guaranteed!

      Use in warehouses, workshops, showrooms and factories with heavy wear and tear

      Top choice for garage floors as it won't mark from hot tyres

      Use on bare concrete or existing well bonded paint

      Water based formulation, virtually solvent free and easy to clean


      Also available:

      Description

      What you get:

      2L Coloured Curing Agent in a 2.5L tin
      0.5L  Clear Resin in a 1L tin
      x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
      (These are mixed together to make 2.5L of paint)

      Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish. 

      Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

      The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

      It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

      For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

      NB: 2.5L is equivalent to 3.3kg

        You might also like: 

         

        How to Use

        Step 1 - Preparation:

        • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
        • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
        • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

         

        Step 2 - Repairs:

        • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

         

        Step 3 - Application:

        • Apply at a minimum temperature of 15 ℃.
        • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
        • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
        • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
        • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
        • Use a brush around the edges and a medium pile roller for the floor.
        • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

         

        EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:

        Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.

         

      • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint. 
      • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic. 
      •  

        Technical Spec
        Interior/exterior usage Suitable for indoor use only
        Properties
        • Virtually odourless - can be applied in confined areas
        • Good general chemical resistance
        Minimum application temperature 15
        Max operational temperature 60 ℃
        Curing times At 15-20°C:
        • Recoat - 12 hours.  The second coat should be applied within 5 days of the first coat.
        • Walk on - 16-24 hours
        • Cars - 2-3 days
        • Full hardness, scratch & chemical resistance - 7 days
        Coverage
        • 5L / 6.6kg covers up to 30m² per coat
        • 2.5L / 3.3kg covers up to 15m² per coat
        Coats required 2. Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 2.5L tin can’t be used for 2 coats. It will cover 15m² with one coat, but if you have for example, 7.5m², you can’t use half the 2.5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin, so select two of these if you want to apply 2 coats to an area of up to 15m². If you have any questions please let us know.
        Epoxy Floor Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
        Usable working time (at 15 ℃) 2 hours at
        Shelf Life 12 months, if unopened, and should not be allowed to freeze

         

        We don't recommend:

        • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
        • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
        • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
        • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
        • Applying to metal since it can cause rusting.
        Data Sheets

        Product Information Sheet

        Download

        Resin Safety Sheet

        Download

        Curing Agent Safety Sheet

        Download

        Anti Slip Aggregate Safety Sheet

        Download

        18783453970501

        18783454003269

        18783454036037

        18783454101573

        Useful Information

        Our Epoxy Floor Paint needs to be applied in two coats. It’s supplied as a tin of resin and a tin of curing agent. And when you mix the contents of the two tins together, it starts a reaction which causes the paint to cure.

        If you’re painting an area of up to 15m², you’ll need two 2.5L tins (because, once mixed, a 5L tin won't keep for the second coat). Whereas, for an area of roughly 30m², you’ll need two 5L tins.

        • Here’s how we work it out:
        • Area to be painted: 45m&sup2 with two coats (we recommend two coats for the best result)
        • Tins needed: 2 x 5L and 2 x 2.5L
        • Why: Use 1 x 5L and 1 x 2.5L for the first coat; and the same again for the second

        Our Coverage Calculator works this out for you – that way you know you’re buying exactly the paint you need and can use, without any waste, at the lowest price – guaranteed.

        Got It
        How it Works
        Calculate
        • Tins

        • Tins

        4L Coloured Curing Agent in a 5L tin
        1L Clear Resin
        x1 tin of Anti Slip Aggregate (Use half with 2.5L or all for the 5L)
        (These are mixed together to make 5L of paint)

        Just the job for sealing, protecting and dust-proofing concrete floors, floorsaver two part epoxy floor paint gives concrete floors in factories, production areas, garages and warehouses a tough, long lasting hygienic and easy to clean Anti Slip finish. 

        Use floorsaver Epoxy Floor Paint where an ordinary single pack paint won't do. Stands up to the wear and tear of an industrial environment, including forklift truck areas, or areas where vehicles are used and parked.

        The right choice for garage floors as it'll stand up to hot tyres and resist automotive fluids and chemicals that ruin ordinary paint. Safe and easy to use, virtually solvent free (extremely low VOC) for hygienic areas.  

        It can be applied to bare concrete, wood, sand and cement screeds as well as existing well bonded paint. We recommend two coats, but if you're painting over an existing paint in a similar colour, one coat should be enough.

        For more info, watch our YouTube video: Why Buy Floorsaver Epoxy Floor Paint.

        NB: 5L is equivalent to 6.6kg

        You might also like: 

         

        Step 1 - Preparation:

        • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface.
        • For greasy or previously painted floors, clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. Lightly sand glossy paint to dull down the shine and roughen it up.
        • New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity and to remove any weak, loose cement deposits.

         

        Step 2 - Repairs:

        • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Filler can be used if you want a curved edge, such as a stair nosing, etc.

         

        Step 3 - Application:

        • Apply at a minimum temperature of 15 ℃.
        • If the floor is still damp as a result of cleaning, it's not a problem since this is a water based epoxy. However, don't put it onto floors where there is rising damp.
        • For both the 2.5 and 5L pack sizes there is a large tin of coloured curing agent and a smaller tin of resin. Stir the contents of the large tin, then add the contents of the small resin tin.
        • Give a good stir with something wide, like a wooden batten or a paint stirrer. If you use an electric paint mixer, also scrape around the sides and bottom of the tin to make sure it's all mixed in.
        • Now it's mixed you've got 2 hours to use it before it becomes unusable. Tip it into a roller tray.
        • Use a brush around the edges and a medium pile roller for the floor.
        • Wash equipment in warm soapy water before it dries, but it's probably more practical to just throw the rollers away.

         

        EPOXY FLOOR PAINT ANTI-SLIP - If using the anti slip version, please proceed as follows:

        Empty the contents of the resin and curing agent tins into the mixing pail provided. For the 5L unit add the entire contents of the Anti Slip Aggregate tin and stir thoroughly, but for the 2.5L only use half of the aggregate. Use immediately. As you roller apply, the aggregate may not look obvious, but will become more so as the paint dries. Two coats are recommended to provide a consistent anti slip surface.

         

      • Are you painting a garage floor? floorsaver Epoxy Floor Paint is perfect for concrete garage floors - it stands up to hot-tyre pick up, and resists automotive fluids and chemicals that would ruin ordinary paint. 
      • Are you painting a warehouse floor? floorsaver Epoxy Floor Paint is the ideal warehouse floor paint because it is tough enough to stand up to heavy foot and vehicle traffic. 
      •  

        Interior/exterior usage Suitable for indoor use only
        Properties
        • Virtually odourless - can be applied in confined areas
        • Good general chemical resistance
        Minimum application temperature 15
        Max operational temperature 60 ℃
        Curing times At 15-20°C:
        • Recoat - 12 hours.  The second coat should be applied within 5 days of the first coat.
        • Walk on - 16-24 hours
        • Cars - 2-3 days
        • Full hardness, scratch & chemical resistance - 7 days
        Coverage
        • 5L / 6.6kg covers up to 30m² per coat
        • 2.5L / 3.3kg covers up to 15m² per coat
        Coats required 2. Floorsaver Epoxy Floor Paint is a two part epoxy resin supplied as a tin of resin and a tin of curing agent. Once the contents of the two tins have been mixed together, a reaction takes place which causes the product to cure. This means that one 5L tin can’t be used for 2 coats. It will cover 30m² with one coat, but if you have for example, 15m², you can’t use half the 5L tin for the first coat, then wait for the first coat to dry before using the other half for the second coat – it will have gone off in the tin. This is why we also make a 2.5L size. This covers 15m² with one coat, so select two of these if you want to apply 2 coats to an area of up to 15m².

        You can combine 5L (30m²) and 2.5L (15m²) for areas which are not multiples of 30m² in size and more than one coat is required. For example, to cover 45m² with 2 coats use 1 x 5L and 1 x 2.5L for the first coat and same again for the second. If you have any questions please let us know.

        Epoxy Floor Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
        Usable working time (at 15 ℃) 2 hours at
        Shelf Life 12 months, if unopened, and should not be allowed to freeze

         

        We don't recommend:

        • Using outside - it can fade under UV, instead, use floorsaver Car Park Paint.
        • Applying to self-levelling floor screeds, without checking compatibility with the screed manufacturer. 
        • Applying to hard, very smooth power floated concrete where paint cannot sink into the surface. If in doubt, tip a cup of water over the surface and see if it soaks in or not.
        • Applying to very weak, crumbly or contaminated concrete since it may not be possible to prepare it well enough for the Epoxy Floor Paint to perform.
        • Applying to metal since it can cause rusting.

        Product Information Sheet

        Download

        Resin Safety Sheet

        Download

        Curing Agent Safety Sheet

        Download

        Anti Slip Aggregate Safety Sheet

        Download

        QUESTIONS & ANSWERS

        Ask a Question
        • A: Hi, i am afraid we would note recommend this coating for this type of area. Although anti slip it does have a texture similar ot a coarse sandpaper and would not be suitable for bare foot areas.

        • A: Our Epoxy floor paint is generally used for concrete surfaces. For painting on to asphalt surfaces we would recommend our Exterior Floor paint – another textured anti slip finish - generally used for car parks, playgrounds, driveways etc.

        • A: We have a product called car park Paint – this a suitable exterior anti slip paint. We would recommend thoroughly abrading any existing coated surface first and then cleaning prior to application.

          If it is a PVA product it would depend on how thick it has been applied to advise on removal procedure, if it has been applied quite thinly then a manual wire brush effect my suffice, if a thick application of PVA has been put down the a more robust manual abrasion with a floor sander may be more beneficial- without knowing or seeing the floor it is hard to determine the best procedure.

          Once thoroughly abraded to re-create a keyed texture surface, ensure the floor is thoroughly cleaned prior to application with a medium pile roller.

        • A: You will need to apply a dampproof membrane before apply any of our coatings.

          However I am afraid this is not a product we have.

          I am sorry I couldn’t be anymore help.

        • A: We don’t have the Epoxy Floor Paint Anti Slip in White. The nearest would be a Light Grey.

          We have the Warehouse Linemarking Paint in White - https://www.floorsaver.co.uk/collections/paint/products/warehouse-linemarking-paint-2-5l

          This is a 2.5L single component product & smooth finish.

        • A: Unfortunately this is not suitable for a wet room environment.

          Our epoxy paints are primarily for use in garage and workshop floors.

        • A: Sorry, we do not recommend steam cleaning a coating.  Steam cleaning is too intensive and can affect the coating either by discolouring it or softening it.