Floor Paint Anti Slip - 5L

Floor Paint Anti Slip - 5L

In Stock

Perfect for improving the look of dull interior floors, floorsaver anti slip concrete floor paint is easy to use, hardwearing and will give you a slip resistant floor that looks great, easy to clean and will last for years, making it the toughest, slip resistant concrete floor paint money can buy

Exceptional slip resistance

Great for warehouses, factories, workshops and heavy foot traffic.

Use it on most surfaces - concrete, wood, stone and cement

Stands up to oil and grease

Also available:

Quantity:

Calculate

Tins

floorsaver Floor Paint dustproofs, seals and protects internal concrete floors. Two coats provide a glossy, easily cleaned finish. It can be applied to bare concrete or existing well bonded paint. When recoating existing floor paint of a similar colour, one coat is generally all that is needed.

You might also like: 

 

Please note - orders for the Yellow colour of our Floor Paint will be labelled as Hazard Paint. 


    Step 1 - Preparation:

    • On bare, reasonably clean concrete wash with floorsaver Floor Etcher. This cleans and keys the surface. On greasy or previously painted floors clean with floorsaver Cleaner & Degreaser, scraping off any loose paint, dust or dirt. New concrete should be at least 2 months old and always washed with floorsaver Floor Etcher to reduce alkalinity.

     

    Step 2 - Repairs:

    • Fill small surface holes and cracks using floorsaver Crack & Hole Filler. Use floorsaver Pourable Concrete Filler for holes 5mm-50mm deep. floorsaver Mouldable Concrete Filler can be used if you want a curved edge, such as a stair nosing, etc.

     

    Step 3 - Application:

    • Check the floor is dry before painting and that the temperature is a minimum of 15 ℃.
    • Stir the paint thoroughly.
    • Do not thin.
    • Tip into a roller tray.
    • Cut in around edges with a brush.
    • Apply to the floor area using a paint roller, working well into the surface. Bare concrete should be sufficiently porous to allow the first coat to sink in.
    • If using floorsaver Floor Paint Anti Slip, tip the small tin of Anti Slip Aggregate into the tin and stir thoroughly using a wooden batten or similar. Use the whole tin of aggregate for the 5L pack size and half for the 2.5L.
    • Clean equipment with White Spirit.
            Interior/exterior usage For interior use only
            Uses Suitable for bare concrete or existing well bonded paint, wood and most metal
            Properties Resists spills of oils and grease
            Coats 2 coats usually required, although 1 coat may be enough if painting over an existing floor paint of a similar colour
            Coverage
          • 5L covers up to 40m² per coat
          • 2.5L covers up to 20m² per coat
          • Drying times

            At 15-20 ℃:

            • Recoat - 16 hours (if there is a time lapse between coats, the second coast must be applied within 5 days of the first coat)
            • Touch Dry - 10 hours
            • Light Foot Traffic - 24 hours
            • Full Use - 36 hours. Please check that the paint has fully cured before putting into full use
            Minimum application temperature 15 ℃
            Applications Tough enough for use in warehouses, workshops and for general industrial use
            Floor Paint Anti Slip Use the whole tin of Anti Slip Aggregate for the 5L pack size and half for the 2.5L
            Shelf life Shelf Life - 3 years, if unopened. Do not allow to freeze.

             

            We don't recommend:

            • Using this product in areas where cars are parked - instead use floorsaver Epoxy Floor Paint.
            • Using outside.
            • Applying to self-levelling floor screeds.
            • Applying to concrete contaminated with oil, grease, fats or wax.
            • Applying to hard, smooth, very dense or power floated concrete where the paint can't soak into the surface. If in doubt tip a cup of water onto the floor and see if it disappears.

            Product Information Sheet

            Download

            Anti Slip Aggregate Safety Sheet

            Download

            Safety Sheet

            Download

            QUESTIONS & ANSWERS

            Ask a Question
            • A: Hi, I am sorry but we only carry this coating in a gloss finish. It would not be suitable for external use as it is not UV resistant. Sorry.

            • A: Hi Pam, our Floor Paint and Epoxy Floor Paint products are not UV resistant. This means they could possibly change colour under epoxsure to sunlight and this is why we dont recommend them for outside use. If the concrete base will have a cover over it, fairly shortly after being painted, this would be fine (in current weather conidtions, but not in winter). But if it will be left uncovered and epoxsed to sunlight, im afraid it may not be suitable.
              Hope this helps, but give us a call if we can hep with anything further.

            • A: Hi, I am afraid it isn't. It is suitable for heavy foot traffic and pallets but not vehicles. However, our epoxy floor paint anti slip would be suitable for vehicles.
              Kind Regards,
              Floorsaver

            • A: hi,  thank you for your enquiry, i don't see why not -  we would recommend thoroughly abrading any existing paint to recreate a key and then ensure the floor is clean and dry prior to applying a new coating.

              if i can help further please let me know.

              regards

              Mark

            • A: The anti-slip Floor paint would be touch dry after approx 10 hours and lght traffic usage around 24 hours.

            • A: Unfortunately we don’t recommend painting patio surfaces as our paints will not have the adhesion.

            • A: This coating is only really for indoors as it will fade with UV exposure.

              We do not have a solid paint for wooden decking.

            • A: Thank you for your enquiry we supply this product in a light grey and a mid grey but not dark.

            • A: Sorry, we only carry mid and light grey.

            • A: Unfortunately this product is not suitable for external use as it is not UV resistant. I am sorry.

              Though to answer to your question regarding slip resistance, any coating labelled anti slip would have an aggregated finish to it. This creates a texture like a coarse sandpaper and helps with safety in wet conditions by allowing the water to sit between the peaks and giving better traction under foot. However, should the level of water exceed the size of the peaks/ridges it would not be effective. Therefore it is important to ensure the area does have some kind of run-off to allow the water to run away and not pool excessively on the coating.